Contact Closure
25 pin D-type connector providing 8 opto isolated inputs and 8 relay contact closure outputs.
Add tally to your ATEM switcher with Blackmagic Design’s GPI and Tally Interface! With 8 contact closure tally outputs, you can send a tally signal to your cameras, replay machines and monitors so everyone knows which camera is ‘on-air’! If you need more tally outputs, simply connect multiple GPI and Tally Interfaces together because it connects via Ethernet to your ATEM production switcher.
25 pin D-type connector providing 8 opto isolated inputs and 8 relay contact closure outputs.
1 x USB 2.0 high speed interface for configuration and firmware updates.
Optical isolators triggered by connection to ground. Max 5V at 14mA.
Mechanical relay contact closure to ground. Max 30V at 1A.
10/100 BaseT with loop through for connecting to other ethernet enabled equipment.
Configured via ATEM Switcher Utility.
Firmware built into software driver. Loaded at system startup or via updater software.
Mac 10.14 Mojave,
Mac 10.15 Catalina or later.
Windows 8.1 and 10.
12V power supply included with international socket adaptors for all countries.
0° to 40° C (32° to 104° F)
-20 – 60 degrees celsius
Up to 95%
GPI and Tally Interface
Software CD
Power Supply
Weight | 0,445 kg |
---|---|
Brand | Blackmagic Design |
Country | UK |
DaVinci Resolve Mini Panel
DaVinci Resolve Micro Panel
Camera URSA Mini – Extension Arm
Power Supply – Pocket Camera 12V10W
DeckLink 4K Extreme 12G – HDMI 2.0
Blackmagic ATEM Camera Control Panel
Camera URSA Mini – Wing Nut Spares
Mini Converter – Quad SDI to HDMI 4K 2
Blackmagic ATEM 2 M/E Production Studio 4K
Käibemaks 22% arvutatakse ostukorvis juurde! Dismiss