Neutrik DIE-R-BNC-PU DIE SET For HX-R-BNC crimp tool
217,10 €
Neutrik DIE-R-BNC-PU DIE SET For HX-R-BNC crimp tool
DIE-R-BNC-PU 1.6mm Square 6.47mm 7.36mm
- Additional information
Additional information
Brand | Neutrik |
---|
217,10 €
Neutrik DIE-R-BNC-PU DIE SET For HX-R-BNC crimp tool
DIE-R-BNC-PU 1.6mm Square 6.47mm 7.36mm
Brand | Neutrik |
---|
NEUTRIK NBNC75BDD6 BNC 3G Male cable, rear twist, for Belden 1855A
NEUTRIK NBNC75BDD6 BNC 3G Male cable, rear twist, for Belden 1855A
BELDEN 1855A – HDTV, SERIAL DIGITAL AND ANALOGUE VIDEO CABLE
Coaxial 75 ohm cable specifically for digital systems installations. Industry size type ‘RG59/U Sub Miniature’
For Neutrik BNC use NBNC75BDD6 connector
NC3FXX
3 pole female cable connector with Nickel housing and silver contacts
DIE-R-BNCX-PU 1.07mm Square 6.47mm 7.36mm
NEUTRIK NBNC75BDD6X BNC 12G UHD Male cable, rear twist, Belden 1855A, Canare L2.5CHWS
NEUTRIK NBNC75BDD6X BNC 12G UHD Male cable, rear twist, Belden 1855A, Canare L2.5CHWS
Neutrik NBNC75BLP9X BNC UHD for Belden 1505A, Belden 4505R
Neutrik NBNC75BLP9X BNC UHD for Belden 1505A, Belden 4505R
Paladin 1255 LC-CST coaxial cable stripper
The LC-CST low-cost, coaxial cable stripper has three blades that can be adjusted for depth of cut. This is done using the supplied hex key, which is housed in a recess in the tool body. Pre-set strip lengths are 8mm for outer jacket and 4mm for dielectric. Suitable for cables in groups X, Y, B, A, Q and similar sizes.
CANARE BCP-TB BNC Resistive terminator 75 ohm 1%
All 75 ohm signals, once entered into a termination, must be fully converted into energy. If the impedance matching is not perfect, part of this energy will be reflected and a poor return loss (VSWR) will result, especially at higher operating frequencies (eg. computer graphics, digital video).
Käibemaks 20% arvutatakse ostukorvis juurde! Dismiss