Neutrik NBNC75BJP9X BNC 3G for Belden 1505F
4,40 €
NEUTRIK NBNC75BJP9X BNC UHD Male cable, rear twist, Belden 1505F; Klotz VD083LP 0.8L/3.7DZ; Cordial CVM 08-37 UHD-FLEX
- Description
- Additional information
Description
NBNC75BJP9X
The rearTWIST UHD BNC connectors are specifically designed for high resolution video signal transmissions. Due to the unique insulator and contact pin design, the connectors feature low return loss values for 4K and 8K signals.
Crimp Dimensions
In order to achieve optimum return loss values at high frequencies the crimp dimension of the contact pin has been reduced.
| Pin: | 1.07 mm (square) |
| Shield: | 6.47 mm (hex) |
| Crimp die: | DIE-R-BNCX-PDG |
Approved Cables
To guarantee high performance for each cable-connector combination at high frequencies Neutrik measured common COAX cables which are specifically designed for ultra high definition transmission (UHD). Find all approved cables listed below.
Suitable cables:
Belden 1505F, Bryant BD SD53F, Cordial CVI 08-37 HD
UHD optimized cable:
Klotz VD083LP 0.8L/3.7DZ, Cordial CVM 08-37 UHD-FLEX
Technical Information
| Product | |
| Title | NBNC75BJP9X |
| Connection Type | BNC 75 Ω |
| Gender | male |
| Electrical | |
| Contact resistance | ≤ 3 mΩ (inner) |
| Contact resistance | ≤ 2 mΩ (outer) |
| Dielectric strength | 1.5 kVdc |
| Impedance | 75 Ω |
| Insulation resistance | > 5 GΩ |
| Rated voltage | < 50 V |
| VSWR | ≤1.06 / >30 dB up to 6 GHz ≤1.13 / >24 dB up to 12 GHz ≤1.22 / >20 dB up to 18 Ghz |
| Mechanical | |
| Cable O.D. | 6.3 mm |
| Cable retention | > 30 N (center) |
| Crimp size | 6.47 Hex crimp (shield) |
| Crimp size (pin) | 1.6 square crimp |
| Insertion force | < 25 N |
| Lifetime | > 1000 mating cycles |
| Wiresize | |
| Locking device | Bayonett |
| Cable anchoring | Jacket crimping |
| Material | |
| Contacts | Brass (CuZn35Pb2), 0.2 µm AuCo (center contact) |
| Shell | Brass (CuZn39Pb3) |
| Shell plating | Antraloy |
| Insert | PP |
| Environmental | |
| Temperature range | – 30 °C to +85 °C |
| Contact crimpability | Complies with IEC 60803 and IEC 60352-2 |
Additional information
| Brand | Neutrik |
|---|
