RODE TF5MP Premium Matched Pair of 1/2″ True Condenser Cardioid Microphones, Including SB20 Stereo Bar

RODE TF5MP Premium Matched Pair of 1/2″ True Condenser Cardioid Microphones, Including SB20 Stereo Bar

1 255,00 

RODE TF5MP Premium Matched Pair of 1/2″ True Condenser Cardioid Microphones, Including SB20 Stereo Bar

The TF-5 represent a new standard in small diaphragm condensers. The all-new capsule is engineered to sub-micron tolerances, giving unprecedented consistency of tone and response.
The TF-5 features the hallmark clarity and airiness of other RØDE small diaphragm mics, and adds to this a unique warmth of tone which is often lacking in smaller ‘pencil mics’ of this type, making the TF-5 uniquely versatile.

Availability: Available on backorder SKU: 698813-005345 Category:
Võrdle
  • Description
  • Additional information

Description

The TF-5 represent a new standard in small diaphragm condensers. The all-new capsule is engineered to sub-micron tolerances, giving unprecedented consistency of tone and response.

The TF-5 features the hallmark clarity and airiness of other RØDE small diaphragm mics, and adds to this a unique warmth of tone which is often lacking in smaller ‘pencil mics’ of this type, making the TF-5 uniquely versatile.

Features

  • Precision-paired small diaphragm cardioid condenser microphones
  • Ultra-low noise
  • Flat frequency response
  • Tight cardioid directivity
  • Warm, accurate sound
  • Suitable for the most critical recording applications
  • Designed in collaboration with Grammy® award winning classical producer and engineer, Tony Faulkner

 

 
 
 
TF-5 SPECIFICATIONS
 
 
ACOUSTIC & ELECTRICAL SPECIFICATIONS
Acoustic Principle

Externally biased condenser

Active Electronics

JFET impedance converter with bipolar output buffer

Polar Pattern

Cardioid

Frequency Range

20Hz – 20kHz

Frequency Response

30 Hz – 20 kHz ±3dB // 20 Hz – 20 kHz ±4dB

Output Impedance

63Ω

Signal to noise Ratio

80 dB

Equivalent Noise

14 dB SPL

(A-weighted, as per IEC651)

Input SPL @ 1% THD

135 dB SPL (1kHz @ 1% THD, 600Ω load)

Sensitivity

-29 dB re.1 Volt/Pascal or better (35 mV @ 94dB SPL @ 1kHz)

Dynamic Range

112.6 dB (1kHz @ Max SPL)

Power Requirements

7mA @ 48V phantom power

MECHANICAL SPECIFICATIONS
Weight (g)

114g (single microphone)

Dimensions

Length: 98.7mm Diameter: 20mm

Additional information

Country

FI

Brand

Rode