SDI Video Input
Automatically switches between SD, HD and 6G-SDI. Reclocked loop through output.
SmartScope Duo 4K looks like a SmartView Duo but adds independent waveform monitoring so you can select between waveform, vectorscope, RGB parade, YUV parade, histogram and audio phase level displays. Each monitor is independent so can display any combination of scope or picture view!
Automatically switches between SD, HD and 6G-SDI. Reclocked loop through output.
1 x 10 bit loop through SD, HD and
6G-SDI switchable.
16 channels embedded in SD, HD and UHD.
16 channels embedded in SD, HD and UHD.
Standard definition SDI, high definition SDI and 6G-SDI.
9-pin D connector

525i29.97 NTSC, 625i25 PAL
720p50, 59.94, 60
1080p23.98, 24, 25, 29.97, 30, 50, 59.94, 60
1080PsF23.98, 24, 25, 29.97, 30
1080i50, 59.94, 60
2K DCI 23.98p, 2K DCI 24p, 2K DCI 25p
2K DCI 23.98PsF, 2K DCI 24PsF, 2K DCI 25PsF
2160p23.98, 24, 25, 29.97, 30
SMPTE 259M, SMPTE 292M, SMPTE 296M, SMPTE 372M, SMPTE 424M Level B and SMPTE 425M.
Television sample rate of 48KHz
4:2:2 and 4:4:4
8-bit
YUV and RGB
USB 2.0 for software updates and Ethernet for configuration
Hardware based real time.
Luminance Waveform, Vectorscope, RGB Parade, YUV Parade, Histogram, Audio phase and level.
Configuration utility for MAC and Windows.
Via included firmware updater software.
3RU
Mac 10.15 Catalina,
Mac 11.1 Big Sur or later.
Windows 10, 64-bit.
12V universal power supply included with international socket adapters for all countries.
< 20 Watts
12V – 15V

0° to 40° C (32° to 104° F)
-20° to 45° C (-4° to 113° F)
0% to 90% non-condensing
SmartScope Duo 4K
Power Supply
SD card with software and manual
12 Months Limited Manufacturer’s Warranty.
NEUTRIK NBNC75BDD6 BNC 3G Male cable, rear twist, for Belden 1855A

NEUTRIK NBNC75BDD6 BNC 3G Male cable, rear twist, for Belden 1855A
Monacor ECM-402L Electret tie clip microphone
SWIT Receiver for SW-M450 Video Transmission System
SWIT SW-M450RS
Receiver for SW-M450 Video Transmission System.
(Transmitter not included).
Datavideo Scopeview IPS WFM/Vector scope monitor (desktop)

Monitor w WFM/Vector scope (desktop)
Procab CLV310A/10 HDMI Active optical 8K cable 10m
Camera power supply cable for CM-55C (SONY NP-FW50 compatible) MA-55C1

Camera power supply cable for CM-55C (SONY NP-FW50 compatible).
4 Inp. HD video switcher
RODE AI1 Ai-1 Single channel Audio interface with combo XLR/instrument input, High quality headphone amp and Balanced 1/4" outputs

RODE AI1 Ai-1 Single channel Audio interface with combo XLR/instrument input, High quality headphone amp and Balanced 1/4″ outputs
RØDE’s AI-1 Audio Interface is packed with incredible technology to ensure recording on your computer is easy, versatile and sounds superb. The AI-1’s single input is a NeutrikTM Combo Jack, which takes both a 3-pole XLR (common to most microphones) and a quarter-inch jack common to most electric instruments like guitar, bass et al. Layering tracks is as easy as plug in, set level and go. Not only does the AI-1 deliver crystal clear audio to your computer software, but headphones have never sounded sweeter thanks to the discrete studio-quality headphone output and level control.
Switching language?
You've switched the language and there are items in the cart. If you keep the English language, the cart will be emptied and you will have to add the items again to the cart.
Käibemaks 24% arvutatakse ostukorvis juurde! Dismiss
