Shop

SWIT Transmitter 700m, SDI & HDMI, Sony F970

SWIT S-4914TF

Wireless Transmitter 700m, SDI & HDMI, Sony F970 mount.

NOTE:

Receiver is not included in this package (see code: S-4915FS for full kit).

Wireless transmitter

Uncompressed 3GSDI, 700m LOS,Transmitter with SONY F970 mount and WHDI (MIMO/OFDM) technology.

Key features:

Professional WHDI (MIMO/OFDM) technology
Uncompressed 3G/HD/SD-SDI and HDMI
2-ch SDI/HDMI embedded audio transmission
700 meters (LOS) transmission distance
Less than 1ms latency
5.1-5.9GHz license-free operation frequency
User configurable frequency bands
Multicast – 1 transmitter to multi receivers
Less than 63mW radio power
AES 256bit encryption
Mini transmitter designed for HDV camcorder
All-metal housing, durable
Pure hardware connection; Plug and Play

Camera URSA EVF – Tensioning Screws

S-7000i JVC SSL DV Battery Mount Plate

› JVC SSL DV battery adaptor plate

› JVC SSL-JVC50 fit

› Open-end wires for customer connection

› Rear metal plate for installation

The SWIT S-CW-S300FS is an uncompressed wireless transmission system for 3G-SDI signals. It is based on WHDI technology, which employs license-free operating frequency bands 5.1-5.9 GHz (DFS compatible), achieving an open-field transmission distance of up to 300 meters and a latency of less than 1 ms. With a radio power of less than 100mW, it is capable of transmitting 2 audio channels embedded in the SDI signal, in addition to time code transmission by SDI. The system supports multicast, allowing up to 3-4 TX-RX pairs that can work together in one location and is fully hardware, without configuration, plug and play, which makes it highly usable for monitoring direction, drones, cameras in difficult locations, steadicam, etc..

The transmitter (Tx) has two omnidirectional antennas and supports 1 3G/HD-SDI input with 3G/HD-SDI output loop. It has a Lemo 4 Pin DC power connector (7-17V). The receiver (Rx) has five omnidirectional antennas and supports two 3G/HD-SDI outputs. It also has a Lemo 4 Pin DC power connector (7-17V).

The CW-S300 radio-link works in the license-free 5.1-5.9GHz band and supports DFS (Dynamic Frequency Switch). The transmitter and receiver are paired to work together. The system allows 3-4 transmitter-receiver pairs to operate simultaneously in the same location. The transmitting power is very low, less than 100mW, which is totally safe for the human body.

The CW-S300 radio-link system allows multicast operation, allowing the user to pair up to 4 receivers with one transmitter, so that all receivers receive the signal from the transmitter.

The transmitter has a 4-pin LEMO 7-17V power input and is equipped with the Sony F970 battery DV adapter, although it can optionally be ordered with the following DV battery adapters:

› 7” non-glaring LCD, 1920×1200 resolution

› 3000nit super high bright

› HDR capable: PQ / HLG / S-log3

› 2K/3G/HD/SD-SDI input & loop output

› HDMI 2.0 (4K60p) input & loop output

› 16-ch embedded audio meters with alert

› Select any 2 audio channels to output

› 9 steps quick zoom-in and mapping

› Focus assist with precision adjustment

› Build-in multi-camera logs to Rec.709

› User 3DLUT cube file import by USB

› On-screen TALLY display and GPI

› Zebra stripes, False color, R/G/B/Mono

› H/V delay, AFD, Timecode display

› Marker 4:3, 13:9, 14:9, 15:9, 1.85:1, 2.35:1

› V/Gold mount or various DV plates option

› USB firmware upgrade

The SWIT S-3010B Portable Charger can be directly connected to batteries with D-Tap sockets via its male D-Tap connector. It accepts 100-240 VAC input and supplies 14-16.8 VDC power to the battery.

Camera power supply cable for CM-55C (SONY NP-FW50 compatible).

SWIT Portable Bi-Directional SDI to/from Optical Fiber Converter

SWIT Dual 9″ Full HD Rack LCD Monitor with IPS Panel

The Dual 9″ Full HD Rack LCD Monitor with IPS Panel from SWIT adopts two 9″ IPS (In-Plane Switching) LCD panels with Full HD resolution. It also features LED backlight, an 800:1 contrast ratio, and a horizontal and vertical viewing angle of 170°. It is overlaid with glass that protects the screens against scratches or cracks.

S-7000F SONY NP-F DV Battery Mount Plate

› SONY NP-F DV battery adaptor plate

› SONY NP-F970/F-770 fit

› Open-end wires for customer connection

› Rear metal plate for installation

Sandisk 128GB SD

SWIT Receiver for SW-M450 Video Transmission System

SWIT SW-M450RS

Receiver for SW-M450 Video Transmission System.

(Transmitter not included).

SWIT S-7003I JVC SSL Battery Plate for S-1053F

JVC SSL DV battery adaptor plate
SWIT S-8i50 and JVC SSL-JVC50 fit
SWIT S-1053F monitor installation

SWIT Wireless FHD Video Transmitter Set (for Panasonic CGA-D54/D28)

SWIT SW-M150DS

SDI & HDMI 150 meter Wireless Video Transmitter System.

For Panasonic CGA-D54/D28 and VW-VBD58, SWIT S-8D62, S-8D58 and S-8D98 Batteries.

SWIT S-4914FS SDI/HDMI Wireless Transmission System

Broadcast-quality wireless transmission, including an S-4914T transmitter and an S-4914R receiver, employs WHDI (OFDM) technology to carry uncompressed 3G/HD/SD-SDI and HDMI signals wirelessly up to 700 meters away with less than 1ms of latency. The system is pure hardware, Plug & Play.

In Line of Sight, the S-4914FS wireless transmission system supports a distance of approximately 700 meters for uncompressed 3G/HD/SD-SDI and HDMI signal transmission, with a delay of less than 1 millisecond.

The S-4914FS wireless system operates in the 5.1-5.9GHz free band. The frequency band is user configurable and supports up to 4 simultaneous wireless channels in one location. The radio power is less than 63mW and do no harm to humans.

Key Features
PP+ Fiber glass case, strong and durable
Install 4 x V-mount batteries
Dual 24V 3-pin XLR DC output
LED panel to display real-time voltage and low voltage warning
Charging without take out batteries by provided 4-pin XLR DC charging socket
Intelligent protective circuit design, safe and reliable