Pood

  • Toode lisati ostukorvi:

    ATOMOS Ninja V Pro Kit

    ATOMOS-Ninja-V-Pro-Kit
    ATOMOS-Ninja-V-Pro-Kit
    0 out of 5

    ATOMOS Ninja V Pro Kit

    ATOMOS Ninja V Pro Kit

    949,00 
  • Toode lisati ostukorvi:

    Audac FMP40 SourceCon™ moodul helifailide mängija

    FMP40-shadow
    FMP40-shadow
    0 out of 5

    Audac FMP40 SourceCon™ moodul helifailide mängija

    The FMP40 is a professional voice file media player featuring SourceCon™ modular technology. This unique technology guarantees true plug & play implementation to any compatible device. When inserted to a supporting slot, the module is instantly installed, discovered and ready for operation without requiring any additional internal wiring or complex configuration. The FMP40 features 50 programmable (timer and/or contact) triggers which can be used for triggering music / voice file messages stored on various types of media carriers. Media playback from USB storage drives is possible when inserted to the controlling device, while an internal Micro SD card slot safely locks the carrier inside for applications where frequent media changes are not required. Media playback is supported in MP3, WMA, WAV, FLAC, OGG and AAC filetypes with numerous supported bitrates. Each of the 15 contact is individually configurable, offering selection for the triggered media file and normal open (NO) or normal closed (NC) contact operation. The playback mode can be selected between pulse trigger (play complete track) or stop on release. Event triggering allows triggering at pre-defined moments. Other settings such as priority level assignment and repeat are making the FMP40 a complete and versatile solution for any application requiring voice file playback, ranging from advertisements and announcements to emergency calls.

    Discover more about our modular audio players

    123,25 
  • Toode lisati ostukorvi:

    Audac ATEO2D/B Kõlar pinnapealner 2" - 16Ω/10W, must

    Kohatäide
    0 out of 5

    Audac ATEO2D/B Kõlar pinnapealner 2″ – 16Ω/10W, must

    A combination of your trusted ATEO2 speaker and a specially designed surface ceiling mount with ClickMount™ technology*.

    The ATEO is a series of extraordinary loudspeakers especially designed for fixed install in indoor applications, ranging from modern residential applications to the most demanding designer applications in environments such as retail stores, pubs, restaurants or even clubs.

    The ATEO2 is the ultra-compact model of this series which smoothly integrates into any interior like no other loudspeaker. The sound originates from a 2” aluminum cone driver which provides a full-range, warm and detailed sound, with an improved response in the low frequencies due to the ported design. This way, smooth sound reproduction with clear and crisp sound is guaranteed.

    The internal self-resetting network provides optimal overload protection. It features a stunningly designed and elegant looking ABS housing which is fitted with high-quality components.

    *The ATEO2S is not compatible with the CleverMount™ mounting system.

    46,08 
  • Toode lisati ostukorvi:

    Audac M67 Dünaamiline käsimikrofon, lülitiga

    Kohatäide
    0 out of 5

    Audac M67 Dünaamiline käsimikrofon, lülitiga

    The M67 is a fully-featured, dynamic general-purpose microphone for the budget-conscious performer who wants style, audio quality and a product that works hard. It is solidly constructed, with a robust grill to protect the diaphragm against rough handling and is suited for indoor as well as outdoor use. The high sensitive neodymium element makes it the perfect microphone for presentations and singers. Due to the unidirectional (super-cardioid) polar pattern, the feedback is reduced to a strict minimum.

    36,50 
  • Toode lisati ostukorvi:

    Audac WX502MK2/W Kõlar pinnapealner 2-ribaline 5¼"/1", 8Ω/100V, 50/40/20/10W, valge, IP40

    Kohatäide
    0 out of 5

    Audac WX502MK2/W Kõlar pinnapealner 2-ribaline 5¼”/1″, 8Ω/100V, 50/40/20/10W, valge, IP40

    The WX502 is a powerful 2-way performance speaker suitable for a wide variety of applications, ensuring true-to-nature, high fidelity reproduction of music and speech. It is fitted with a 1” dome tweeter and a 5 1/4”low-frequency loudspeaker, capable of delivering a power of 50 Watt. It can be used in standard 8 Ohm systems but also in 100V PA systems with power taps for 40 Watt, 20 Watt and 10 Watt. The elegant shaped synthetic enclosure is available in two different colours (black & white), making it blend into any environment, going from standard indoor home to special indoor design interiors. The included steel mounting bracket allows horizontal and vertical mounting as well as focusing of the speaker and an integrated advanced protection network protects the tweeter against overload.

    This new series retains all its strengths but has also been upgraded in a few specific areas with installer convenience and durability in mind. The connection of the indoor loudspeakers is changed to a terminal block, which makes it easier to install and connect the WX MK2 series wall speaker, while daisy-chaining is made more convenient through additional connection terminals (4-pin).. Both indoor and outdoor versions are now equipped with an elegant rotatable AUDAC logo.

    78,33 
  • Toode lisati ostukorvi:

    Audac TR3240 Kõlaritrafo 240W 50/70/100V - 8/4/2Ω

    Kohatäide
    0 out of 5

    Audac TR3240 Kõlaritrafo 240W 50/70/100V – 8/4/2Ω

    The TR3xxx offers a range of line transformers with a power ranging from 30 Watt up to 480 Watt. There are different taps available for 50V, 70V and 100V lines and the low impedance side is selectable between 2 Ohm, 4 Ohm and 8 Ohm. 

    90,58 
  • Toode lisati ostukorvi:

    Audac MBK112 Paigaluskronstein PX112 kõlarile, must

    Kohatäide
    0 out of 5

    Audac MBK112 Paigaluskronstein PX112 kõlarile, must

    The MBK112 series mounting brackets are especially designed for the mounting of the AUDAC PX series speakers. These black brackets allow mounting the speakers in any possible situation. For the mounting of the PX series speaker with the corresponding bracket, the pole flange adapter in the bottom of the speaker has to be replaced with a screw flange adapter, which is included. They are constructed of solid steel, and come with all the necessary parts for safe mounting, such as 2 M10 bolts and a safety cable with M10 eye bolt mounting. This bracket is also available in white, MBK112/W

    42,50 
  • Toode lisati ostukorvi:

    Audac VEXO8/B Kastkõlar 2-ribaline 8"/1" - 175W, must

    Kohatäide
    0 out of 5

    Audac VEXO8/B Kastkõlar 2-ribaline 8″/1″ – 175W, must

    The VEXO8 is a high-output loudspeaker cabinet, featuring an 8” high efficiency mid/low range driver and 1” compression driver fitted with a 100° x 80° coverage horn, providing a powerful and detailed sound in a compact cabinet.

    The exceptional accuracy and clarity coming from this compact cabinet are recommended to be extended with a complementary bass cabinet adding the punchy & deep bass, resulting in a stunning sound over the entire frequency range. Their elegant enclosure allows them to be used in modern & trendy installation applications such as bars and nightclubs, while their functional features make them perfect for use in compact mobile systems.

    It delivers a powerful full-range sound with an RMS rating of 175 Watt and a maximum of 350 Watt.  Compression driver overload protection is provided through an internal limiting circuit. Connections are made using two speaker connectors allowing link through to other cabinets.

    Mounting in both horizontal and vertical direction, up to 20°, is possible with the included wall bracket and the rotatable horn. An optional 35mm pole adapter can be installed when used in mobile applications.

    267,00 
  • Toode lisati ostukorvi:

    Audac Q4TR Sobitustrafo blokk D-võimenditele 19", 4x 600W, 4Ω - 100/70/50V

    Kohatäide
    0 out of 5

    Audac Q4TR Sobitustrafo blokk D-võimenditele 19″, 4x 600W, 4Ω – 100/70/50V

    The Q4TR is a line transformer unit, especially designed to be used in combination with the Q4 quad channel power amplifier. It transforms the 4 Ohm low impedance loudspeaker outputs of the Q4 amplifier into loudspeaker signals to be used in constant voltage audio distribution systems, such as 100V, 70V or 50V systems. It features 4 separate audio line transformers with a total power of 4 x 600 Watt, and the transformers have power taps for 100V, 70V and 50V applications.

    701,67 
  • Toode lisati ostukorvi:

    Audac NMP40 SourceCon ™ võrgu helipleieri moodul

    Kohatäide
    0 out of 5

    Audac NMP40 SourceCon ™ võrgu helipleieri moodul

    The NMP40 SourceCon™ Network audio player module enables the possibility to stream audio files from a personal computer or mobile device directly to a professional audio system while maintaining the best available sound quality.

    Compatible with various streaming technologies like Spotify Connect and Soundtrack Your Brand© you can stream music straight to your professional sound system directly from the cloud while using only your computer or mobile device as a controller. This avoids any unwanted interruptions and maintains higher sample rates, so you can also set the right ambient in all types of public places (Always check with your local license regulations).

     

    Discover more about our modular audio players

    *The NMP40 is not compatible with AUDAC Touch™ 1. It will only be compatible with AUDAC Touch™ 2.

    212,08 
  • Toode lisati ostukorvi:

    Audac TR2050 Eraldustrafo 2x RCA-M -2x RCA-F

    Kohatäide
    0 out of 5

    Audac TR2050 Eraldustrafo 2x RCA-M -2x RCA-F

    The TR2050 is a basic ground loop isolator designed to electrically isolate audio devices from each other. Hum in audio systems is usually caused by ground loops in the system. A common mode current will flow in a ground loop created by an electrical system that has grounds on different voltage potentials. This results in a 50 Hz hum in the audio signal. The most common method to solve these problems is an audio isolation transformer such as the TR2050 which always need to be in reach for every audio technician. When ground loop problems are encountered, these can be solved in a jiffy, by using the TR2050.

    8,92 
  • Toode lisati ostukorvi:

    Audac KYRA6/B Tulpkõlar 6x 2", 12Ω/100V, 60/20/10/5W, IP3x, must

    Kohatäide
    0 out of 5

    Audac KYRA6/B Tulpkõlar 6x 2″, 12Ω/100V, 60/20/10/5W, IP3x, must

    The KYRA column speakers range is the elegant result of research in the field of phased array acoustics. The selection of the highest quality materials including aluminum cone 2” drivers guarantee an extraordinary detail and clarity for music and speech, which is uncommon for any kind of column speaker available from the market. It makes them perfectly lend themselves to a wide variety of applications in acoustic difficult environments such as churches, auditoria, presentation and meeting rooms where audibility and intelligibility of music and speech have the highest importance.

    They are housed in slim and elegant constructed enclosures made out of aluminum materials and finished with finely perforated grilles. An included mounting bracket with minimum distance to the wall allows swivelling and down-tilting for perfect directional placement.

    The KYRA6 design column speaker consists of 6 x 2” high-quality aluminum cone full-range drivers, delivering extraordinary clarity and detailed sound. The overall continuous power handling reaches 60 Watt and the beamwidth of 174° x 28° (-6 dB avg 1 kHz – 4 kHz)* makes it the perfect match for acoustically difficult venues, reducing echo and microphone feedback which optimizes the speech intelligibility in reverberant venues.

    A multi-tapping line transformer allows it to be connected to 70V/100V public address systems with different power taps for 20W, 10W and 5W and/or low impedance (12Ω) systems.

    *Given dispersion values are the average beamwidth within the 1 kHz – 4 kHz frequency range (-6 dB – 1/3 oct), which are critical for the speech intelligibility in the main application field of these loudspeakers.

    271,67 
  • Toode lisati ostukorvi:

    Audac GLI08/OB Eesvõre CIRA8 kõlarile väliskasutuseks, värvitu

    Kohatäide
    0 out of 5

    Audac GLI08/OB Eesvõre CIRA8 kõlarile väliskasutuseks, värvitu

    The GLI series are optionally available front grills with TwistFix™ technology for the CIRA loudspeaker series. The GLI grills fit the CIRA8 speakers and are available in 3 versions: black (/B), white (/W) and paintable (/P).

    The TwistFix™ system assembles the speakers’ grill through twisting. A bayonet-type locking with lips on the grill side gets fixed through insertion to slots on the speakers housing and giving it a partial turn. This system guarantees lifetime stable mounting while fixation can be done in record-breaking time.

    For outdoor protection, these steel speaker grills are electroplated.

    14,00 
  • Toode lisati ostukorvi:

    Audac TR3120 Kõlaritrafo 120W 50/70/100V - 8/4/2Ω

    Kohatäide
    0 out of 5

    Audac TR3120 Kõlaritrafo 120W 50/70/100V – 8/4/2Ω

    The TR3xxx offers a range of line transformers with a power ranging from 30 Watt up to 480 Watt. There are different taps available for 50V, 70V and 100V lines and the low impedance side is selectable between 2 Ohm, 4 Ohm and 8 Ohm. 

    62,67 
  • Toode lisati ostukorvi:

    Audac SMQ1250 Võimsusvõimendi 4x4Ω/1250W

    Kohatäide
    0 out of 5

    Audac SMQ1250 Võimsusvõimendi 4×4Ω/1250W

    The SMQ series are quad channel power amplifiers providing a new standard for affordable audio amplification in both fixed and mobile audio installations. Their advanced features and availability in different output powers for 350 Watt, 500 Watt, 750 Watt and 1250 Watt provide an enormous flexibility for numerous applications. The WaveDynamics™ DSP processor in combination with the 2.5” LCD display gives an unmatched user experience with intuitive functions overview for easy configuration. Acoustics can be optimized using Butterworth, Bessel and Linkwitz-Riley filters with selectable rolloff which can be configured as Low / High & Band Pass and the 7-Band equalizer which has adjustable frequencies and Q-factor. Other provided functions are delay and dynamic bass boost. These settings can be custom configured using the front panel of the amplifier, whereby access can be given on two different levels (User & Administrator) using password or USB-key protection. Loudspeaker protection is provided by an output power limiter whereby the maximum output power for every channel (in Watt) can be configured. Configuration is made simple with loudspeaker presets and full system configurations which can be selected from a library and uploaded with an USB flash drive. This ensures the best acoustical performance with a bullet-proof loudspeaker protection. A great input flexibility and source compatibility is provided by the input selection matrix in combination with the XLR and terminal block signal connections. The outputs are made using Speaker and Terminal block connections. System integration is made easy using the RS-232 control port. An optional Dante™ interface is available for the WaveDynamics™ amplifiers. The installation of this network interface allows receiving and sending of low latency, high quality audio over a standard Ethernet network.

    1 408,33 
  • Toode lisati ostukorvi:

    Audac ASP20/W Kõlar rippuv 100V/20-10-5W, valge

    Kohatäide
    0 out of 5

    Audac ASP20/W Kõlar rippuv 100V/20-10-5W, valge

    The SP series are high-efficiency sound projectors designed to provide good speech intelligibility and background music in a wide variety of applications. Designed for indoor use and perfectly suited to be used in large 70/100V broadcast systems such as train stations or airports. The ASP20 is a 20 Watt spherical loudspeaker, fitted with an 8″ driver and a 70/100V line transformer with different power tappings for 20 Watt, 10 Watt and 5 Watt. Its wide, smooth frequency response and high efficiency ensure high fidelity music and speech reproduction with a 360° horizontal coverage. This makes it perfect for big, open areas like factory halls or large retail spaces. The ABS housing is moisture and UV resistant and is equipped with a 3.5 m connection cable with a steel core which meets all safety requirements for ceiling mounting.

    71,83 
  • Toode lisati ostukorvi:

    Audac WMA20/B Vaherõngas 30° ATEO2/B kõlarile, must

    Kohatäide
    0 out of 5

    Audac WMA20/B Vaherõngas 30° ATEO2/B kõlarile, must

    The WMA series incline bracket is specially designed for the ATEO speaker series. These brackets add an extra 30° angle to the already existing incline angle of ATEO speakers. This bracket opens the possibility to place the speaker horizontally or vertically in an angle up to 60° and ensures a perfect sound experience. The bracket extends the CleverMount™ technology by complimenting the flow from the speaker cabinet to its bracket and maintain the ease for installing the loudspeaker in one good-looking entity.  

    2,08 
  • Toode lisati ostukorvi:

    Audac CENA706/W Kõlar süvistatav 6,5" - 8Ω/100V, 10/6/3W, valge

    Kohatäide
    0 out of 5

    Audac CENA706/W Kõlar süvistatav 6,5″ – 8Ω/100V, 10/6/3W, valge

    The unbeatable one. The CENA series are full-range ceiling speakers, designed to offer an unmatched solution for large scale public address projects. The SpringFit™ fixation offers the fastest possible installation time of any speaker available on the market, while the borderless grill design is absolutely unseen for any ceiling speaker in this segment. With the selection of high-quality cone materials, exceptional intelligibility and background music performance are guaranteed. The CENA Series are equipped with SnapConnect™, a faster, more reliable and safer choice for fixed installations, accepting solid and stranded wires with sections up to 4.0 mm².

    The CENA706 features a 6.5” broadband driver with a continuous power handling of 10 Watt (RMS) and maximum power handling of 20 Watt. It is fitted with a multi-tapping 100V line transformer with tappings for 6W and 3W.

    22,17 
  • Toode lisati ostukorvi:

    Audac GLC02/W Eesvõre CELO2 kõlarile, valge

    Kohatäide
    0 out of 5

    Audac GLC02/W Eesvõre CELO2 kõlarile, valge

    The GLC series are optionally available front grills for the CELO loudspeaker series. The GLC02 grills fit the CELO2 speakers and are available in 3 versions : black (/B), white (/W) and paintable (/P). The grill is held in place using neodymium magnets, providing a quick and reliable assembly.

    6,58 
  • Toode lisati ostukorvi:

    Audac CENA306/B Kõlar süvistatav 2,5" - 8Ω/100V, 10/6/3W, must

    Kohatäide
    0 out of 5

    Audac CENA306/B Kõlar süvistatav 2,5″ – 8Ω/100V, 10/6/3W, must

    The unbeatable one. The CENA series are full-range ceiling speakers, designed to offer an unmatched solution for large scale public address projects. The SpringFit™ fixation offers the fastest possible installation time of any speaker available on the market, while the borderless grill design is absolutely unseen for any ceiling speaker in this segment. With the selection of high-quality cone materials, exceptional intelligibility and background music performance are guaranteed. The CENA Series are equipped with SnapConnect™, a faster, more reliable and safer choice for fixed installations, accepting solid and stranded wires with sections up to 4.0 mm².

    The CENA3 features a 2,5” broadband driver with a continuous power handling of 10 Watt (RMS) and maximum power handling of 20 Watt. It is fitted with a multi-tapping 100V line transformer with tappings for 6W and 3W.

    15,00 
  • Toode lisati ostukorvi:

    Audac VC3102/W Helitugevuse regulaator releega 100V/100W 45x45mm, valge

    Kohatäide
    0 out of 5

    Audac VC3102/W Helitugevuse regulaator releega 100V/100W 45x45mm, valge

    The VC3102 is a 100 Volt volume controller capable of handling a power up to 100 Watt. The volume is adjustable with a rotatable dial in 11 steps of 3 dB. It is equipped with a relay and separate input for the reception of 24V priority signals. This means that when a priority signal occurs, the volume will be automatically switched to maximum level. This can be very useful for emergency and evacuation messages. Due to it’s slim and good looking design, these volume controls will blend into all kinds of different environments or interiors. The construction is made of sturdy ABS and therefore suitable for big projects in industrial buildings as well as standard home interiors. The dimensions are 80 mm x 80 mm, and a built-in depth of 46 mm is required. The connections are made at the back with screw terminal blocks.

    35,75 
  • Toode lisati ostukorvi:

    Audac DW3018/W Juhtpaneel süsteemne 8 tsooni, 45x45mm, valge

    Kohatäide
    0 out of 5

    Audac DW3018/W Juhtpaneel süsteemne 8 tsooni, 45x45mm, valge

    The DW3020 is a flush mount wall panel controller designed to work in combination with the R2 amplifier. It can be installed in a separate zone, and gives the possibility to select the desired audio source and adjust the volume for the zone that it’s applied to. The connection between the amplifier and the controller is made by using standard UTP CAT5 cabling with RJ45 connectors.

    93,75 
  • Toode lisati ostukorvi:

    Audac MBK302S/B Riputuskronstein kõlaritele FX 3.15 ja FX1.18, must

    Kohatäide
    0 out of 5

    Audac MBK302S/B Riputuskronstein kõlaritele FX 3.15 ja FX1.18, must

    The MBK302S ceiling flying system is especially designed for mounting the FX3.15 and FX1.18 high-output cabinets. Using these mounting brackets, the top and bass cabinet can be flown and mounted on any ceiling, or other position, while aiming the loudspeakers into the desired angle. The bracket set consists of:

    • 1x MBK310/B       Fly frame for FX series loudspeaker bracket
    • 1x MBK315/B       Side board set for FX3.15 (2pcs)
    • 1x MBK318/B       Mounting board set for FX1.18 (2pcs side + 1pcs back)
    • 1x MBK320/B       Connection board set angle plate 20° – 60° (2pcs)
    • 1x MBK302S-SS   MBK302S-SS Screw set for MBK302S
    928,17 
  • Toode lisati ostukorvi:

    Audac VEXO112/B Kastkõlar 2-ribaline 12"/1,7" - 8Ω/400W, must

    Kohatäide
    0 out of 5

    Audac VEXO112/B Kastkõlar 2-ribaline 12″/1,7″ – 8Ω/400W, must

    The VEXO series are compact 2-way loudspeakers and come in 3 different models, each of them with different size and performance meeting the requirements of every application. The VEXO series loudspeakers consist of an active and passive versions. The low frequency transducer, which is made out of high quality materials, is combined with a 1.7” voice coil compression driver, enabling high sound pressure levels and a tight driver response with a rotatable 90° x 70° coverage pattern for a wide range of applications.

    Thanks to the unique driver composition, the VEXO112 delivers a clear and natural sound with an RMS power of 400 Watts and a maximum power of 1600 Watt. The frequency range (-10dB) starts from 58Hz up to 20 kHz and the sensitivity (1W/1m) reaches 99 dB while a maximum continuous sound pressure level from 125 dB can be achieved.

    Using an optional 70V/100V line transformer enables the VEXO series to be used in 70V or 100V systems. By removing the back plate and replace it with a 70V/100V backplate on which the module is integrated, the high performance loudspeaker is able to apply in a 70V/100V system.

    The construction of the cabinets is made of 12mm plywood with a polyurethane coating, making it resistant for any impact. The front side of the cabinet is finished with a powder coated steel grill with acoustical foam. A recessed carry handle on the rear side makes carrying easy. Positioning and suspension of the speaker is easily achieved by using the standard 35 mm pole adapter on the bottom and the M10 rigging points. Two speaker connectors provide reliable connections with easy link-through to cabinets.

    The optional Clever U bracket allows mounting the high power 2-way cabinet both horizontally and vertically. An inclination of 90° in both directions ensures an optimal positioning. The optional MBK bracket even allows mounting the VEXO series to the ceiling which gives the opportunity to install the loudspeaker cleanly in any environment.

    527,50 
  • Toode lisati ostukorvi:

    Audac AMP20MK2 Mini stereo võimendi

    Kohatäide
    0 out of 5

    Audac AMP20MK2 Mini stereo võimendi

    The AMP20 is a mini stereo power amplifier with a power rating of 2 x 15 Watt, that lends itself perfectly to small speaker systems requiring compact and economical audio solutions. It offers the ideal solution for applications such as class rooms, offices and meeting rooms where only a small amount of speakers are required. The compact size and very high efficiency makes it perfectly suited to be hidden in a closet, on a false ceiling or mounted under a desk or table. The combination of the stereo balanced line, with microphone input, makes it perfectly suited for applications where it should be used in combination with projection screens and video sources while a microphone is connected. Two gain potentiometers make it possible to control the sensitivity and balance between music and speech, while a switch allows bridging of the output channels to obtain one channel with merged output power. A remote wall mixer can be connected for applications where local mixing for the inputs is desirable, while large distances can be covered between the source and amplifier using simple CAT5 twisted pair cabling. The volume controller input allows connection of an additional wall controller for overall volume control. The Class-D amplifier technology, standby mode and included switching power supply makes this device compliant to the highest energy efficiency and environmental requirements. A variety of optionally available mounting brackets for the AUDAC S-Box product range are allowing desk, closet or 19” equipment rack installation.

    164,75 
  • Toode lisati ostukorvi:

    Audac MSP40 Meediamängija-salvestaja

    Kohatäide
    0 out of 5

    Audac MSP40 Meediamängija-salvestaja

    The MSP40 is a professional media player/recorder supporting a wide variation of compressed and lossless audio formats. Playback of MP3, OGG, AAC, FLAC, WMA and WAV is possible in numerous bit rates, while recordings are possible in MP3, OGG and WAV file types. The front panel of the system accomodates a 2.8” TFT display in combination with a push rotary function dial and 4 tactile pushbuttons. The controls and indicators on the front panel of the unit are guaranteeing an intuitive and user friendly operation, allowing hassle free operation and configuration to even  unexperienced users. All media information including track, artist, playback mode, … are indicated on the graphical user interface, while playback modes are selectable between single or continous play and various repeat and random play modes are available. Both the balanced stereo line output (playback) and the balanced stereo line input (recording) are implemented using two 3-pin terminal block connections. The USB media carrier shall be inserted to the USB socket on the front panel of the unit. The RS-232 communication port allows system integration with any home or industrial automation system, while an optional 2.4 GHz remote control allows handheld control while hidden out of sight.

    Discover more about our modular audio players

    268,00 
  • Toode lisati ostukorvi:

    Audac MWS800/B Tuulekaitse CMX826 mikrofonile, must

    Kohatäide
    0 out of 5

    Audac MWS800/B Tuulekaitse CMX826 mikrofonile, must

    This microphone windscreen reduces breath and wind noises. Designed to be used with CMX826, also suitable for other pipe-neck condenser microphones. Available in black and beige colours.

    5,08 
  • Toode lisati ostukorvi:

    Audac NELO706/B Kõlar pinnapealner 6,5", 100V-6/3W, must

    Kohatäide
    0 out of 5

    Audac NELO706/B Kõlar pinnapealner 6,5″, 100V-6/3W, must

    The NELO706 surface-mount loudspeakers allow installation to any wall or ceiling where functional and cost-efficient reproduction for music & speech is required. It features a 6.5” broadband loudspeaker with a continuous power handling of 10 Watt (RMS) and is fitted with a line transformer for use in 70V/100V public address systems with power tappings for 6W and 3W. The housing is minimalistic and elegant designed with a very narrow border and a finely perforated steel grill on the front. Connections are made through SnapConnect™ terminals, offering a faster, more reliable and safer choice for fixed installations. The NELO706 are available in various models with (NELO706V) and without (NELO706) individual volume controller on its side while being available in two different colors (Black /B & White /W) to blend in with any residential, commercial or industrial environment.

    Please note: given specifications are preliminary and subject to change.

    30,50 
  • Toode lisati ostukorvi:

    Audac TBA40 Kõlarikandur ripplaele CALI424-le

    Kohatäide
    0 out of 5

    Audac TBA40 Kõlarikandur ripplaele CALI424-le

    The TBA series tile bridges are optional accessories for installing the CALI series speakers into 60 x 60 cm or 120 x 60 cm ceiling tiles in suspended ceiling applications. Designed to make mounting of the tile bridge possible through the speaker cutout.

    25,42 
  • Toode lisati ostukorvi:

    Audac TR266 Eraldustrafo 1:1/600Ω

    Kohatäide
    0 out of 5

    Audac TR266 Eraldustrafo 1:1/600Ω

    The AUDAC TR266 is a super shielded true isolation audio transformer which is especially designed to be used in highly polluted EMI environments. Hum in audio systems is usually caused by ground loops in the system. A common mode current will flow in a ground loop created by an electrical system that has grounds on different voltage potentials. This results in a 50 Hz hum in the audio signal.The most common method to solve these problems is an audio transformer. The AUDAC TR266 audio isolation transformer with an in- and output impedance of 600 Ohm and a turns ratio of 1 : 1 has a very wide bandwidth and very low distortion which ensures a non distorted bass response and non attenuated high frequencies. Thanks to its MU-metal shielding, it can guarantee the best performance in even the most EMI polluted environments. MU-Metal is a soft ferromagnetic material with a very high magnetic permeability. It consists of an alloy of Nickel, Iron, Copper and Molybdenum. MU-Metal has a magnetic shielding effectiveness going from 100x up to 1000x higher than steel of equivalent thickness. It is especially good in 50/60hz type applications where all other shieldings fail. The TR266 super shielded transformer can be used for applications where the shielding of standard transformers becomes inadequate. A typical example of such an application is the broadcast system in railway stations.

    41,67 
  • Toode lisati ostukorvi:

    Audac TR1024F Kõlari trafo 100V-8Ω/24/12/6W

    Kohatäide
    0 out of 5

    Audac TR1024F Kõlari trafo 100V-8Ω/24/12/6W

    The TR1000 series are 100 Volt line transformers, designed for impedance matching between loudspeakers and amplifiers. They are used for converting low impedance speakers allowing them to be used in 100V PA installations where long cableruns can be used. The transformers have an over-dimensioned core, which limits saturation to a minimum and gives remarkable improvement of the sound reproduction quality, especially in the low frequencies. There are several power tappings available for 100V, and depending of the transformer that’s used, the output impedance can also be selected.

    12,50 
  • Toode lisati ostukorvi:

    Audac ANI44XT Dante võrgukaart 4 sisse/4 välja WaveDynamics ™võimenditele, AES67/Touchlink

    Kohatäide
    0 out of 5

    Audac ANI44XT Dante võrgukaart 4 sisse/4 välja WaveDynamics ™võimenditele, AES67/Touchlink

    The ANI44XT is a Dante™ audio network interface for installation into WaveDynamics™ series amplifiers with four input and four output channels. The installation of this optional module allows these amplifiers to be integrated into any Dante™ enabled AV network and flawlessly transfer digital audio with any compatible product on the market, ranging from music sources to microphone systems, mixers, and many more. A true plug & play solution is created when linking multiple Dante™ enabled devices with each other on a standard IP network. It offers self-configuring solutions by using DHCP configuration, while the connection can be made to any existing 100 Mbit or 1 Gbit network infrastructure. Bidirectional signal transmissions with a sampling frequency of 48 kHz and a bit depth of 24 bit are simultaneously possible on all in and output channels while guaranteeing an incredibly low latency with a maximum up to 5 ms. (depending on the network occupation). The network connection is implemented using an Ethercon compatible connector, allowing connection using standard RJ45 or ruggedized Ethercon connections in professional applications. The ANI44XT comes delivered as an installation kit, including all required accessories for integration into the amplifier chassis. Installation shall be performed by qualified technicians.

    The updated ANI44XT will have new functionalities like:

    • Updated power supply with much better performance in terms of noise and interference sensitivity.
    • AES67 protocol and TouchLink™ compatibility.

     

    238,33 
  • Toode lisati ostukorvi:

    Audac CMX826/B Elektreet peamikrofon, must

    Kohatäide
    0 out of 5

    Audac CMX826/B Elektreet peamikrofon, must

    The CMX826 is a headset condenser microphone with a directional cardioid pick-up pattern, designed for professional ‘hands free’ voice reinforcement or recording applications. The cardioid pick-up pattern guarantees an excellent rejection of background noise and feedback, allowing it to be used in acoustical demanding applications or situations where the performer is positioned in front of loudspeakers or monitors. The highly adjustable head bracket is lightweight, ergonomically and not to be obstructive constructed, guaranteeing a minimum visual impact. The dual ear construction features a rubber covering with a comfortable and stable fitting, while offering the possibility for positioning on both left & right ear side. The highly flexible boom guarantees a highly accurate and fast positioning. The tailored frequency response in combination with the special headband and highly flexible microphone boom makes the CMX826 the perfect fit for stage performances such as theaters or musicals and even highly energetic live performances such as gym / aerobics or other live performances where musicians are also acting as vocalists. A drop stopper on the microphone boom avoids humidity to reach the microphone cell. A connector splits the cable from the microphone, allowing quick exchange which is valuable for both service use or when used in combination with different types of transmitters. The microphone comes with 4 types of connectors included, making it suitable for use with different major systems manufacturers. Additional connector types are optionally available. Available in black and beige and comes with windscreen and cable clip for anchoring to clothing included.

    131,08 
  • Toode lisati ostukorvi:

    Audac PSD241 Toiteblokk =24V/1,67A

    Kohatäide
    0 out of 5

    Audac PSD241 Toiteblokk =24V/1,67A

    The PSD241 is designed specifically for equipment with a low power consumption (1,67A at max 40W), such as the extremely efficient AMP20 amplifier. The PSD series offers a wide range of versatile switching power supplies. They are mainly used as power supply for extension units, interface boxes or other expansion units of sound systems, but they can be used for all kinds of applications requiring 12V DC or 24V DC, at different current ratings. There are two different construction forms available, standard ABS housings suited for standard applications, and industrial graded designed DIN rail mounting versions, to be used in all kinds of applications. Going from small and simple applications to industrial environments and hazardous locations.

    26,67 
  • Toode lisati ostukorvi:

    Audac DSC70/B Kõlarikaabel trossiga 7m, must

    Kohatäide
    0 out of 5

    Audac DSC70/B Kõlarikaabel trossiga 7m, must

    Connection cable with dual steel core, snap hook & open ends – 7 meter. For use with the ALTI series speakers (not suited for ALTIxM series). This connection cable with two integrated steel cores is designed for suspension with an additional drop safety. Fixation is made through two snap-hooks on one end and a dual Gripple™ fixation on the other end.

    33,83 
  • Toode lisati ostukorvi:

    Audac WMI16/B Pesapaneel 45x45mm XLR-F - rj45 konverter, must

    Kohatäide
    0 out of 5

    Audac WMI16/B Pesapaneel 45x45mm XLR-F – rj45 konverter, must

    The WMI16 is a Wall Microphone Input unit which can be used in combination with AUDAC MTX series Multi-Zone audio matrix systems, the RM523 & AMP523 web-based input control units and the APG20 receiver gateway. It provides the possibility for transferring an audio signal from a Microphone level audio source over a large distance by using standard CAT5e UTP (or better) cable.

    The connection should be made using an RJ45 connector on the back side of the unit. The depth of the RJ45 connector will not allow the WMI16 to be installed in surface mount boxes. A jumper on the rear side of the panel allows you to enable the 12V phantom power for powering condenser microphones and the audio transfer is done in a differential way with increased voltage levels, making the transferred signal insensitive for interference and noise generated by external devices. This allows bridging distances up to 500 meter between the input unit and the receiver end.

    The WMI16 is the 45 x 45 mm version of the WMI units, which can be used in combination with standard AUDAC, Niko, Legrand or other 45 x 45 mm installation materials. Available in Black (/B) and White (/W).

    75,00 
  • Toode lisati ostukorvi:

    Audac MWX65/W Juht- ja sisendpaneel MTX maatriksile, valge

    Kohatäide
    0 out of 5

    Audac MWX65/W Juht- ja sisendpaneel MTX maatriksile, valge

    The MWX65 is an all-in-one wall panel controller to be used in combination with the AUDAC MTX series multi-zone audio matrix systems. It can control the input signal and volume for one zone and also contains an additional line and microphone level input which can be patched to the zone it is connected to. Both input selection and volume control as well as two band tone control can be controlled using the versatile rotatable push-dial while the integrated 2.5” graphical display ensures a user friendly experience. An XLR connector is provided as additional microphone input while the line input is performed using RCA connectors. The signals applied to these inputs can be used as one additional local input. This enables you to connect any CD or MP3 player as local music source or connect a microphone for speeches or other announcements. The input mixing can be done by using both push-lock potentiometers. The microphone input has the possibility to provide 12V phantom power which can be turned on and off by software configuration. The wiring between the matrix and the wall panel should be performed by using standard UTP CAT5 cabling which transfers both the control and audio signals to the matrix while providing the power supply for the wall panel.

    158,92 
  • Toode lisati ostukorvi:

    Audac SMQ500 Võimsusvõimendi 4x4Ω/500W

    Kohatäide
    0 out of 5

    Audac SMQ500 Võimsusvõimendi 4×4Ω/500W

    The SMQ series are quad channel power amplifiers providing a new standard for affordable audio amplification in both fixed and mobile audio installations. Their advanced features and availability in different output powers for 350 Watt, 500 Watt, 750 Watt and 1250 Watt provide an enormous flexibility for numerous applications.The WaveDynamics™ DSP processor in combination with the 2.5” LCD display gives an unmatched user experience with intuitive functions overview for easy configuration.Acoustics can be optimized using Butterworth, Bessel and Linkwitz-Riley filters with selectable rolloff which can be configured as Low / High & Band Pass and the 7-Band equalizer which has adjustable frequencies and Q-factor. Other provided functions are delay and dynamic bass boost. These settings can be custom configured using the front panel of the amplifier, whereby access can be given on two different levels (User & Administrator) using password or USB-key protection. Loudspeaker protection is provided by an output power limiter whereby the maximum output power for every channel (in Watt) can be configured.Configuration is made simple with loudspeaker presets and full system configurations which can be selected from a library and uploaded with an USB flash drive. This ensures the best acoustical performance with a bullet-proof loudspeaker protection.A great input flexibility and source compatibility is provided by the input selection matrix in combination with the XLR and terminal block signal connections. The outputs are made using Speaker and Terminal block connections. System integration is made easy using the RS-232 control port. An optional Dante™ interface is available for the WaveDynamics™ amplifiers. The installation of this network interface allows receiving and sending of low latency, high quality audio over a standard Ethernet network.

    942,42 
  • Toode lisati ostukorvi:

    Audac BASO10/B Bassikõlar 10" - 8Ω/225W, must

    Kohatäide
    0 out of 5

    Audac BASO10/B Bassikõlar 10″ – 8Ω/225W, must

    The BASO cabinets are universally usable passive bass cabinets. Their bass reflex design is engineered to be as compact as possible while giving the maximum performance in terms of sound quality and pressure. Their enclosures are crafted out of sturdy high-quality plywood while their elegant design enables them to be placed in any environment. The BASO10 is loaded with a 10” high-performance woofer with an RMS power rating of 225 Watt and maximum power of 450 Watt. The strength of this loudspeaker originates from a four layer wounded 1.5” voice coil in combination with an over-sized ferrite type magnet which provides an unusual high force factor. In combination with the low-loss suspension, this results in a linear behaviour with high efficiency and extremely wide frequency range These carefully selected high-grade materials in collaboration with accurate acoustical craftsmanship results in a deep and true to nature reproduction of bass. The highly-efficient design results in a sensitivity of 96 dB with capability of continuous sound pressure production up to 120 dB. The frequency response ranges from 54 Hz up to 1.2 kHz while going down to 38 Hz at -10 dB. Besides these acoustical aspects, a lot of attention has been paid to all other aspects making it as versatile as possible. The enclosure is compact designed without any sacrifice to robustness due to the 15 mm high-quality plywood material finished with structured coating. Connections are made using two SpeakON compatible connectors located in a recessed connector dish, allowing link-through to other cabinets. This also allows close placement to any wall or corner.

    257,67 
  • Toode lisati ostukorvi:

    Audac AWC50/B Kõlari ühenduskaabel AWX5 pistikuga, must, 5,0m

    Kohatäide
    0 out of 5

    Audac AWC50/B Kõlari ühenduskaabel AWX5 pistikuga, must, 5,0m

    Connection cable with a waterproof AWX5 5-pin terminal, for use with outdoor WX series, KYRA_O and HS121 loudspeakers. Available in several lengths and both black & white colour.

    14,42 
  • Toode lisati ostukorvi:

    Audac WP225/B Sisendpaneel universaalne Bluetooth-ga, must

    Kohatäide
    0 out of 5

    Audac WP225/B Sisendpaneel universaalne Bluetooth-ga, must

    The WP225 is a remote wall mixer that can be used in combination with various AUDAC hardware (ARES5A, MTX series, AMP523 and more). It converts the signal coming from a stereo line-level audio source (such as a tuner, mobile devices, … ) or balanced microphone to the level corresponding to the differential signal input making it possible to transfer high-quality audio over long distances between the wall panel and the loudspeaker, by just using inexpensive twisted-pair CAT5e or better cabling. On the front side of the wall panel, there is a 3.5 mm jack stereo line input connection available together with a balanced XLR microphone input, both provided with their own knob which allows the signals to be mixed together.

    It also features a Bluetooth receiver and pair button with a handy LED indicator to check if its in pairing mode or already connected to a device. Bluetooth pair name can be customized as desired. The Bluetooth receiver works with iPhones, iPads, iOS & Android smartphones, tablets, PC, Laptops, Desktops, etc…

    The WP225 is available in 2 colours (White – RAL9003 & Black – RAL9005) and is compatible with most standard EU (80×80 mm) style in-wall boxes for solid and hollow walls. With the Elegant ABS front panel with glass, it will blend into any environment.

    125,00 
  • Toode lisati ostukorvi:

    Audac CELO5 Kõlar süvistatav 2-ribaline 5"/1" - 8Ω/50W, valge

    Kohatäide
    0 out of 5

    Audac CELO5 Kõlar süvistatav 2-ribaline 5″/1″ – 8Ω/50W, valge

    The CELO series is AUDAC‘s first high-end, slim ceiling speaker series, consisting of four models which can guarantee an optimal experience for every situation and application. The CELO5 is the 5” model of this series. Due to its slim grill design with a very thin border of only 1 mm and a limited grill depth which extrudes from the ceiling surface by only 3.2 mm, these speakers will become nearly invisible when mounted. To make them blend in even more, the grill can be painted in the same color as the surrounding surface or an optional black grill (GLC05/B) will provide seamless integration in dark environments.

    The elegant and unobtrusive grill is held in place by means of powerful neodymium magnets, making assembly and disassembly very simple but still reliable enough to keep the grill in place during the complete lifetime of the loudspeaker. When the grill is removed, it’s clear for anyone to see that the CELO speakers are made by using only the highest quality materials, guaranteeing an unsurpassed sound experience.

    One 1” aluminum cone tweeter is held in place by an acoustically optimized arm in front of a 5” aluminum cone woofer. Together with the crossover network which is made of high-quality components, this results in true to nature sound reproduction for a warm and detailed sound with an RMS power of 50 Watt.

    To guarantee a lifetime stability, secure mounting and easy installation, the loudspeaker connection is made using Gold plated spring clamp connectors. The mounting of the loudspeaker into the ceiling should be done by a quick-fixing mechanism which can be tightened by four screws and the front grill.

    95,33 
  • Toode lisati ostukorvi:

    Audac TR3480 Kõlaritrafo 480W 50/70/100V - 8/4/2Ω

    Kohatäide
    0 out of 5

    Audac TR3480 Kõlaritrafo 480W 50/70/100V – 8/4/2Ω

    The TR3xxx offers a range of line transformers with a power ranging from 30 Watt up to 480 Watt. There are different taps available for 50V, 70V and 100V lines and the low impedance side is selectable between 2 Ohm, 4 Ohm and 8 Ohm. 

    162,58 
  • Toode lisati ostukorvi:

    Audac GLC08/P Eesvõre CELO8 kõlarile, värvitav

    Kohatäide
    0 out of 5

    Audac GLC08/P Eesvõre CELO8 kõlarile, värvitav

    The GLC series are optionally available front grills for the CELO loudspeaker series. The GLC08 grills fit the CELO8 speakers and are available in 3 versions : black (/B), white (/W) and paintable (/P). The grill is held in place using neodymium magnets, providing a quick and reliable assembly.

    16,83 
  • Toode lisati ostukorvi:

    Audac MWS220/B Tuulekaitse 130mm, Ø15mm mikrofonidele, must

    Kohatäide
    0 out of 5

    Audac MWS220/B Tuulekaitse 130mm, Ø15mm mikrofonidele, must

    This microphone windscreen reduces breath and wind noises. Designed to be used with CMX220, but can also be used with other shotgun microphones. Available in black. 130 MM x Ø 23 MM OUTER DIMENSIONS? 120 MM x Ø 15 MM INNER DIMENSIONS

    7,58 
  • Toode lisati ostukorvi:

    Audac PMQ240 Võimsusvõimendi 4x 100V/240W

    Kohatäide
    0 out of 5

    Audac PMQ240 Võimsusvõimendi 4x 100V/240W

    The PMQ series are professional 100V quad channel power amplifiers, providing a new standard for premium sound 100V amplification in public address applications. Their advanced features and availability in different output powers provide an enormous flexibility for numerous applications. 

    The PMQ240 is a four channel Class-D 100V power amplifier with an output power of 240 Watt for each channel. The WaveDynamics™ DSP processor combination with the 2.5” LCD display gives an unmatched user experience with intuitive functions overview for easy configuration. 

    Acoustics can be optimized using the filters selectable between Low / High & Band Pass and the 7-Band equalizer both with adjustable frequencies and Q-factor. Other provided functions are delay and dynamic bass boost. These settings can be custom configured using the front panel of the amplifier, whereby access can be given on two different levels (User & Administrator) using password or USB-key protection. 

    Configuration is made simple by the loudspeaker presets and full system configurations which can be selected from a library and uploaded with a USB flash drive. This ensures the best acoustical performance with a ‘bullet-proof’ loudspeaker protection. 

    A great input flexibility and source compatibility is offered by the input selection matrix and the XLR and terminal block signal connections. System integration is made easy using the RS-232 control port. Optional Dante™ interface is available for the WaveDynamics™ amplifiers. The installation of this network interface allows receiving and sending of low latency, high quality audio over a standard Ethernet network.

    1 046,42 
  • Toode lisati ostukorvi:

    Audac ATEO2/B Kõlar pinnapealner 2" - 8Ω/10W, must

    Kohatäide
    0 out of 5

    Audac ATEO2/B Kõlar pinnapealner 2″ – 8Ω/10W, must

    A combination of your trusted ATEO2 speaker and a specially designed surface ceiling mount with ClickMount™ technology*.

    The ATEO is a series of extraordinary loudspeakers especially designed for fixed install in indoor applications, ranging from modern residential applications to the most demanding designer applications in environments such as retail stores, pubs, restaurants or even clubs.

    The ATEO2 is the ultra-compact model of this series which smoothly integrates into any interior like no other loudspeaker. The sound originates from a 2” aluminum cone driver which provides a full-range, warm and detailed sound, with an improved response in the low frequencies due to the ported design. This way, smooth sound reproduction with clear and crisp sound is guaranteed.

    The internal self-resetting network provides optimal overload protection. It features a stunningly designed and elegant looking ABS housing which is fitted with high-quality components.

    *The ATEO2S is not compatible with the CleverMount™ mounting system.

    46,08 
  • Toode lisati ostukorvi:

    Audac CSE55/W Kõlar süvistatav evakuatsiooni LED-ga, 4" - 8Ω/100V, 10/6/3/1,5W, valge

    Kohatäide
    0 out of 5

    Audac CSE55/W Kõlar süvistatav evakuatsiooni LED-ga, 4″ – 8Ω/100V, 10/6/3/1,5W, valge

    The CSE55 is a professional ceiling speaker with an integrated red LED unit which can be used as visible alarm signal. It features a 4 1/3″ single cone loudspeaker which is capable of producing up to 10 Watt RMS with a maximum of 20 Watt and it ensures good reproduction of speech and background music in all situations. The speaker is fitted with a 100V line transformer and different power taps are available for 6 Watt, 3 Watt and 1.5 Watt at 100V. The integrated LED unit delivers a light intensity of 24 Lumen on a supply voltage of 24V DC.

    43,75 
  • Toode lisati ostukorvi:

    Audac MWS05/B Tuulekaitse 40mm, Ø12mm mikrofonidele, must

    Kohatäide
    0 out of 5

    Audac MWS05/B Tuulekaitse 40mm, Ø12mm mikrofonidele, must

    This microphone windscreen reduces breath and wind noises. Designed to be used with CMX45, CMX55 and APM Paging consoles. Also suitable for other Gooseneck condensor microphones. 40 MM x Ø 28 MM OUTER DIMENSIONS?. 32 MM x Ø 12 MM INNER DIMENSIONS.

    5,08 
  • Toode lisati ostukorvi:

    Audac MBK112/W Paigaluskronstein PX112 kõlarile, valge

    Kohatäide
    0 out of 5

    Audac MBK112/W Paigaluskronstein PX112 kõlarile, valge

    The MBK112 series mounting brackets are especially designed for the mounting of the AUDAC PX series speakers. These black brackets allow mounting the speakers in any possible situation. For the mounting of the PX series speaker with the corresponding bracket, the pole flange adapter in the bottom of the speaker has to be replaced with a screw flange adapter, which is included. They are constructed of solid steel, and come with all the necessary parts for safe mounting, such as 2 M10 bolts and a safety cable with M10 eye bolt mounting. This bracket is also available in white, MBK112/W

    42,50 
  • Toode lisati ostukorvi:

    Audac MBS104R Paigalduskomplekt nelja AUDAC S-Box™ mooduli paigaldamiseks 19" racki

    Kohatäide
    0 out of 5

    Audac MBS104R Paigalduskomplekt nelja AUDAC S-Box™ mooduli paigaldamiseks 19″ racki

    The MBS1xx is a series of installation accessories for use in combination with the AUDAC S-Box™ products range. This range includes a variation of small electronic products such as amplifiers, transformer boxes, converters, and many more.

    In combination with the MBS1xx series, extended assembly possibilities are offered to allow them to be fixed underneath tables or desks, assembled above drop ceilings or mounted to 19” equipment racks. The mechanic construction for each of these products is identical, allowing a combined installation for various products.

    23,42 
  • Toode lisati ostukorvi:

    Audac TSP40 FM tüüner

    Kohatäide
    0 out of 5

    Audac TSP40 FM tüüner

    The TSP40 is a professional FM tuner with worldwide FM band support which provides access to a wide variation of radio stations while guaranteeing a high-quality audio reproduction. Station selection can be done manually or automatically, while up to 10 preferred channels can be internally stored and recalled. The front panel of the system accommodates a 2.8” TFT display in combination with a push rotary function dial and 4 tactile pushbuttons. The controls and indicators on the front panel of the unit are guaranteeing an intuitive and user friendly operation, allowing hassle free operation and configuration to even unexperienced users. Information such as radio station information carried by RDS and signal reception strength are indicated. The signal output level is user configurable and traffic announcement volume can be individually set which guarantees the best intelligibility in specific requiring applications. Other functions such as mono/stereo switching always guarantee the best possible audio reception. The FM tuning range can be switched between 64 ~ 108 MHz and 87.5 ~ 108 MHz for worldwide FM band support. The antenna input is implemented by an F-type connector allowing connection of the included antenna cable or any other external antenna using 75 O coaxial cabling. The balanced stereo line output is connected through two 3-pin terminal block connections. The RS-232 communication port allows system integration with any home or industrial automation system, while an optional 2.4 GHz remote control allows handheld control while hidden out of sight.

    Discover more about our modular audio players

    169,92 
  • Toode lisati ostukorvi:

    Power amplifier kit

    Kohatäide
    0 out of 5

    Power amplifier kit

    The POW2 is an optional power amplifier kit which can be installed inside the R2 and M2 Multi-Zone Digital Audio Matrix housing. In its standard configuration, the R2 or M2 is equipped with 8 line level output channels on which the appropriate amplifiers can be connected, depending on the required power for the specific application. For certain applications where no large power capacities are required, the optional power amplifier kit can be installed, resulting in a multifunctional matrix and power amplifier merged into one single housing. The POW2 consists of a 16 channel (8 Stereo channel) Class-D amplifier, delivering a power of 60 Watt to every channel at 4 Ohm. In bridge mode, an output power of 8 x 120 Watt can be obtained at 8 Ohm. It features an advanced protection circuit which protects against DC malfunctioning, short circuit, overheating and overload while a large heatsink and speed controlled ventilation fan ensure a proper operation temperature is continuously maintained. The POW2 power amplifier kit includes the power amplifier module, a switching power supply and all necessary connection and installation accessories to properly install the kit inside the R2 or M2’s housing. Note: The POW2 replaces the older R2POW model, which offered comparable functionality and performance.

    832,50 
  • Toode lisati ostukorvi:

    Audac ATEO4D/B Kõlar pinnapealner 2-ribaline 4"/1" - 16Ω/35W, must

    Kohatäide
    0 out of 5

    Audac ATEO4D/B Kõlar pinnapealner 2-ribaline 4″/1″ – 16Ω/35W, must

    The ATEO is a series of extraordinary loudspeakers especially designed for fixed install indoor applications, ranging from modern residential applications to the most demanding designer applications in environments such as retail stores, pubs, restaurants or even clubs.

    The ATEO4 is the 4” version with a 1” dome tweeter and a 4” Mid /Low-frequency driver, ensuring a true to- nature, high-fidelity reproduction of music and speech. It features a stunningly designed and elegant looking ABS housing which is fitted with high-quality components. What makes this loudspeaker range so exceptional is the specially designed mounting bracket using the Clevermount™ technology, making the loudspeakers cabinet flow together with the mounting bracket providing great ease for installing the loudspeaker in one good-looking entity. The ATEO4MK2 is an improved version of its predecessor where we have been able to improve the sound quality by implementing a new crossover. With its balanced 1” dome tweeter and 4” mid/low-frequency driver the ATEO4MK2 ensures an ultra-flat frequency response and forms the ideal solution for fixed install indoor applications.

    The mounting and connection of the loudspeaker simply happens by attaching the included metal wall-plate to the desired location. When mounted, the wires must be connected to the desired terminal of the custom connection block. The desired power tap for 100 Volt or 8 Ohm can be selected by picking the right terminal. After this is done, only five seconds of work is left for clipping the loudspeaker onto the wall-plate, tightening the safety screw and you’re ready to rock! This way, it’s really child’s play to install a large number of loudspeakers in no-time.

    Even if you’re working all alone while people are watching your fingers or when installing the speakers up high when you’re standing on a ladder. All ATEO series speakers are available in black (/B) or white (/W).

    68,58 
  • Toode lisati ostukorvi:

    Audac MBK250/B Adapter tulpkõlari paigaldamiseks 35mm kõlarijalale

    Kohatäide
    0 out of 5

    Audac MBK250/B Adapter tulpkõlari paigaldamiseks 35mm kõlarijalale

    Thanks to this 35mm adapter piece you can place KYRA series column speaker effortlessly on any speaker stand. The MBK250 consists of the 35mm adapter piece, wing nut to fasten the adapter to a 35mm speaker pole and a large screw that can fix the original column speaker bracket to the adapter. 

    18,50 
  • Toode lisati ostukorvi:

    Audac GLC05/P Eesvõre CELO5 kõlarile, värvitav

    Kohatäide
    0 out of 5

    Audac GLC05/P Eesvõre CELO5 kõlarile, värvitav

    The GLC series are optionally available front grills for the CELO loudspeaker series. The GLC05 grills fit the CELO5 speakers and are available in 3 versions : black (/B), white (/W) and paintable (/P). The grill is held in place using neodymium magnets, providing a quick and reliable assembly.

    11,67 
  • Toode lisati ostukorvi:

    Audac PC3000/W Programmivalija 45 x 45 mm, valge

    Kohatäide
    0 out of 5

    Audac PC3000/W Programmivalija 45 x 45 mm, valge

    The PC3000 is a flush mount wall program selector for 100V PA installations. It is compatible with AUDAC, Niko, Legrand and other standard 45 x 45 mm installation materials. The output can be selected out of 5 different sources using the rotatable dial. Due to it’s slim and good looking design, these program selectors will blend into all kinds of different environments or interiors. The construction of the PC3000 is made with sturdy ABS and therefore suitable for big projects in industrial buildings to the standard installation into home design interiors. The connections are made at the rear side, using screw terminal blocks. Matching coverplates for the PC3000 are separately available (CP45CF). Available in Black (/B) and White (/W).

    30,92 
  • Toode lisati ostukorvi:

    Audac RMT40 Distantsjuhtimispult universaalne

    Kohatäide
    0 out of 5

    Audac RMT40 Distantsjuhtimispult universaalne

    The RMT40 remote controller can be used in combination with a variety of audio source devices. It features 13 buttons with various functions depending on the unit it is connected to.

    2.4 GHz wireless technology offers a transmission distance up to ~ 10 meters, allowing out-of-sight operation which is a great advantage compared to regular IR remote control systems. An included USB type receiver shall be connected to the provided USB slot on the audio source device. Transmitters and receivers are matched with unique ID’s, allowing simultaneous operation of multiple systems without disturbance while receiver extension is possible using USB extension cables when installed in closed/shielded cabinets.

    It is constructed of high-quality ABS materials with a brushed look finishing, giving it stylish elegant appearance while rubber-type buttons offer a comfortable feel. The transmitter is powered by 2 x AAA (included) batteries.

    Discover more about our modular audio players

    19,75 
  • Toode lisati ostukorvi:

    Audac GLM05/W Eesvõre MERO5 kõlarile, valge

    Kohatäide
    0 out of 5

    Audac GLM05/W Eesvõre MERO5 kõlarile, valge

    The GLM series are optionally available front grills for the MERO loudspeaker series. The GLM05 grills fit the MERO5 speakers and are available in 3 versions : black (/B), white (/W) and paintable (/P). The paintable version (/P) front grilles come with a separated acoustic cloth, which avoids it to get stuck after being painted. The grill is held in place using neodymium magnets, providing a quick and reliable assembly.

    11,42 
  • Toode lisati ostukorvi:

    Audac MBS101R Paigalduskomplekt ühe AUDAC S-Box™ mooduli paigaldamiseks 19" racki

    Kohatäide
    0 out of 5

    Audac MBS101R Paigalduskomplekt ühe AUDAC S-Box™ mooduli paigaldamiseks 19″ racki

    The MBS1xx is a series of installation accessories for use in combination with the AUDAC S-Box™ products range. This range includes a variation of small electronic products such as amplifiers, transformer boxes, converters, and many more.

    In combination with the MBS1xx series, extended assembly possibilities are offered to allow them to be fixed underneath tables or desks, assembled above drop ceilings or mounted to 19” equipment racks. The mechanic construction for each of these products is identical, allowing a combined installation for various products.

    14,83 
  • Toode lisati ostukorvi:

    Audac WTR06 Kõlaritrafo 6W, 100V - 6/3/1,5W, IP66

    Kohatäide
    0 out of 5

    Audac WTR06 Kõlaritrafo 6W, 100V – 6/3/1,5W, IP66

    The WTR06 is a 100 Volt line transformers for impedance matching between low impedance loudspeakers (8 Ohm) and 100 Volt amplifiers. Using the WTR06 line transformer, low impedance loudspeakers can be applied to any 100 Volt public address system where long cable runs can be used. The WTR06 has a maximum output power of 6 Watt and different power taps for 6 Watt, 3 Watt and 1.5 Watt. The housing is designed to be water- and dustproof, while making it possible to be hidden at any location such as above false ceilings, in wall junction boxes, in hollow places inside walls, … The primary connection (100V side) is performed using a special designed waterproof AWX5 connector whereby the desired power tap can be selected depending on the rotation of the connector. The secondary connection (8 Ohm side) is performed using a waterproof cable gland. A connection cable with a length of 0.5 meter is provided on both sides of the transformer. The over-dimensioned core of the transformer limits the saturation to a minimum and gives a remarkable improvement of the sound reproduction, especially in the low frequency range. All these features make these transformers comply to an Ingress Protection rating of IP66.

    18,17 
  • Toode lisati ostukorvi:

    Audac CPB115P Kõlarikott PX115-le

    Kohatäide
    0 out of 5

    Audac CPB115P Kõlarikott PX115-le

    The CPB series are heavy duty splash waterproof speaker bags especially designed for the protection and handling of the AUDAC PX and RX speakers in all possible situations. The design ensures that it is possible to reach the connections, place the speaker on a stand and carry the speaker using the speaker handles even when the cover bag is attached. When not used, all these openings can be covered with a stitched flap from the same material. The front of the bag can be opened with a zipper to use the speaker without removing the bag. During transportation and storage, the front can be closed to avoid any damage to the speaker. The bags are made out of extra strong, water repelling polyester with heavy duty stitching and are finished with small rubber feet. The inside has a special soft coated protection to avoid structural damages.

    36,00 
  • Toode lisati ostukorvi:

    Audac MBK410C/B Riputuskronstein kõlarile NOBA8, must

    Kohatäide
    0 out of 5

    Audac MBK410C/B Riputuskronstein kõlarile NOBA8, must

    The MBK410C is a mounting bracket system for fixation of NOBA8(A) speakers on any ceiling. It allows central positioning for directional placement to guarantee the optimal sound coverage throughout the area.

    It is composed of a ceiling section and speaker section which can be hooked with each other. This guarantees great installers convenience for fixing the ceiling section on the desired location, while the speaker can be hooked afterwards. The hinge type structure allows easy access to the internal connectors. A duct keeps the cables in position and avoids them touching the speaker cone.

    The construction is made of solid and powder coated steel material and comes available in both black (/B) and white (/W) colors for matching the speakers.

    49,17 
  • Toode lisati ostukorvi:

    Audac GLM06/W Eesvõre MERO6 kõlarile, valge

    Kohatäide
    0 out of 5

    Audac GLM06/W Eesvõre MERO6 kõlarile, valge

    The GLM series are optionally available front grills for the MERO loudspeaker series. The GLM06 grills fit the MERO6 speakers and are available in 3 versions : black (/B), white (/W) and paintable (/P). The paintable version (/P) front grilles come with a separated acoustic cloth, which avoids it to get stuck after being painted. The grill is held in place using neodymium magnets, providing a quick and reliable assembly.

    13,25 
  • Toode lisati ostukorvi:

    Audac MBK200PM/B Adapter postilkinnituseks MBK208MK2-le ja MBK212MK2-le, must

    Kohatäide
    0 out of 5

    Audac MBK200PM/B Adapter postilkinnituseks MBK208MK2-le ja MBK212MK2-le, must

    The MBK200PM is an optional accessory for the MBK2xxMK2 series brackets specifically designed for pole mount applications. The adapter gets mounted to the back of the MBK2xxMK2 bracket and provides a stable solution for pole diameters of up to Ø90mm. It is made of 4mm thick zinc plated steel with a structured black powder coating which gives it excellent corrosion and scratch resistance. All necessary bolts and nuts are included, including 2 stainless steel U-bolts.

    26,08 
  • Toode lisati ostukorvi:

    Audac ANI44 Dante võrgukaart 4 sisse/4 välja WaveDynamics ™võimenditele

    Kohatäide
    0 out of 5

    Audac ANI44 Dante võrgukaart 4 sisse/4 välja WaveDynamics ™võimenditele

    The ANX44 is a Dante audio network interface for installation in the XMP44 professional modular audio system, featuring four input and four output channels. The installation of this optional module allows the XMP44 to be integrated into any DANTE enabled AV network and flawlessly transfer digital audio with any compatible product on the market.

    The bidirectional audio exchange with the 4 SourceCon™ interface card slots allows distribution of the audio stream from the installed modules, allowing any radio tuner, media player, internet radio or other audio source distribution throughout your Dante network.

    A true plug & play solution is created when linking multiple DANTE enabled devices with each other on a standard IP network. It offers self-configuring solutions by using DHCP configuration, while the connection can be made to any existing 100 Mbit or 1 Gbit network infrastructure.

    Bidirectional signal transmissions with a sampling frequency of 48 kHz and a bit depth of 24 bit are simultaneously possible on all in and output channels while guaranteeing an incredibly low latency with a maximum up to 5 ms. (depending on the network occupation).

    The ANX44 comes delivered as an installation kit, including all required accessories for integration into the XMP44 chassis. Installation shall be performed by qualified technicians.

    Discover more about our modular audio players

    273,83 
  • Toode lisati ostukorvi:

    Audac PA616 Võimsusvõimendi 16x 4Ω/60W

    Kohatäide
    0 out of 5

    Audac PA616 Võimsusvõimendi 16x 4Ω/60W

    The DPA616 is a professional sixteen channel power amplifier which is capable of delivering a power of 60 Watt to 4 Ohm loads connected to the 16 output channels. When used in bridge mode, it can deliver a power of 120 Watt to 8 Ohm loads connected to the 8 bridged outputs. This way, the DPA616 is the perfect solution for installed multi-zone audio distribution systems with 8 or 16 zones. This amplifier is designed as a no-nonsense amplifier with only the necessary controls and connections which creates great simplicity in use and installation. The input connections are all performed with 3-pin Terminal block connectors, allowing the connection of balanced input signals. Every channel is fitted with a separate gain control potentiometer and for every two input connectors, there is a stereo / bridge & parallel switch provided whereby two channels can be bridged or linked in parallel, avoiding a cable clutter when multiple channels should be fed with the same input signal. The output connections are performed with 4-pin Terminal block connectors allowing connections for separate or bridged output channels. A built-in multipurpose protection circuit protects against DC malfunction, short circuit, overheating, overload and limits the signal when necessary. This all is housed in a double rack space, steel 19” rack mount housing.

    1 067,25 
  • Toode lisati ostukorvi:

    Audac CMA144/W Riputuskronstein 4x ATEO4 kõlaritele, valge

    Kohatäide
    0 out of 5

    Audac CMA144/W Riputuskronstein 4x ATEO4 kõlaritele, valge

    The CMA144 is a cluster mounting set, allowing assembly for 4 pcs of ATEO4 speakers to any ceiling. This solution is designed for applications in large open indoor spaces where a uniform sound dispersion in all directions is required. Some typical application examples are sports facilities, gym’s, large warehouses, hallways, and many more.
    The CMA144 is constructed of solid steel and comes fully assembled, including pole and ceiling mount. The distance to the ceiling measures 360 mm and the pole allows cable integration, so a clean and elegant solution is offered.
    The tilted mounting plates in combination with the Clevermount™ bracket structure allows optimal directional placement in any application.
    The CMA series also come in a 2 speaker model (CMA142), allowing mounting of speakers in both opposite directions and are available in both Black (/B) or White (/W) colours, to match the speakers colour and blend in with the environment.
    The CMA144 comes delivered excluding the loudspeakers.

    41,67 
  • Toode lisati ostukorvi:

    Audac ATEO2D/W Kõlar pinnapealner 2" - 16Ω/10W, valge

    Kohatäide
    0 out of 5

    Audac ATEO2D/W Kõlar pinnapealner 2″ – 16Ω/10W, valge

    The ATEO is a series of extraordinary loudspeakers especially designed for fixed install in indoor applications, ranging from modern residential applications to the most demanding designer applications in environments such as retail stores, pubs, restaurants or even clubs.

    The ATEO2 is the ultra-compact model of this series which smoothly integrates into any interior like no other loudspeaker. The sound originates from a 2” aluminum cone driver which provides a full-range, warm and detailed sound, with an improved response in the low frequencies due to the ported design. This way, smooth sound reproduction with clear and crisp sound is guaranteed.

    The internal self-resetting network provides optimal overload protection. It features a stunningly designed and elegant looking ABS housing which is fitted with high-quality components. What makes this loudspeaker range so exceptional is the specially designed mounting bracket using Clevermount™ technology, making the loudspeakers cabinet flow together with the mounting bracket providing great ease for installing the loudspeaker in one good-looking entity.

    The mounting and connection of the loudspeaker are done by mounting the wall-plate to the desired location. The terminal block connector should be fitted to the wires coming from the amplifier and plugged into the counterpart on the speakers’ side. The only next step is clipping the speaker onto the wall plate and tightening it by a quarter turn until it’s fixed.

    33,67 
  • Toode lisati ostukorvi:

    Audac GLM05/P Eesvõre MERO5 kõlarile, värvitav

    Kohatäide
    0 out of 5

    Audac GLM05/P Eesvõre MERO5 kõlarile, värvitav

    The GLM series are optionally available front grills for the MERO loudspeaker series. The GLM05 grills fit the MERO5 speakers and are available in 3 versions : black (/B), white (/W) and paintable (/P). The paintable version (/P) front grilles come with a separated acoustic cloth, which avoids it to get stuck after being painted. The grill is held in place using neodymium magnets, providing a quick and reliable assembly.

    11,42 
  • Toode lisati ostukorvi:

    Audac EPA104 Võimsusvõimendi krossoveriga 4x 4Ω/100W

    Kohatäide
    0 out of 5

    Audac EPA104 Võimsusvõimendi krossoveriga 4x 4Ω/100W

    This energy efficient stereo amplifier will automatically switch to a standby mode when no audio signals are detected (less than 1Watt power consumption in standby mode). Their weight and compact size makes these single rack space amplifiers ideal for both fixed and mobile installations. Their use of Class-D technology ensures excellent efficiency as well as outstanding sound quality. Thanks to the complete passively cooled entity only a minimal of maintenance is needed, while ensuring maximum reliability. The quad channel construction consists of four channels with the possibility to use two independent stereos. In combination with the integrated active crossover network, it offers a complete solution for compact stereo applications with a bass cabinet. Various specific functions and advanced circuitry guarantees an optimal protection against DC malfunctioning, short circuit, overheating and overload. Signal input connections are integrated with balanced XLR connectors. Outputs are connected using terminal block connectors.

    390,17 
  • Toode lisati ostukorvi:

    Audac VEXO110/B Kastkõlar 2-ribaline 10"/1,7" - 8Ω/300W, must

    Kohatäide
    0 out of 5

    Audac VEXO110/B Kastkõlar 2-ribaline 10″/1,7″ – 8Ω/300W, must

    The VEXO series are compact 2-way bass-reflex loudspeakers and come in 3 different models, each of them with different size and performance meeting the requirements of every application. The VEXO series loudspeakers consist of an active and passive versions. The low frequency transducer, which is made out of high quality materials, is combined with a 1.7” voice coil compression driver, enabling high sound pressure levels and a tight driver response with a rotatable 90° x 70° coverage pattern for a wide range of applications.

    Thanks to the unique driver composition, the VEXO110 delivers a clear and natural sound with an RMS power of 300 Watts and a maximum power of 1200 Watt. The frequency range (-10dB) starts from 65Hz up to 20 kHz and the sensitivity (1W/1m) reaches 96dB while a maximum continuous sound pressure level from 121dB can be achieved.

    Using an optional 70V/100V line transformer enables the VEXO series to be used in 70V or 100V systems. By removing the back plate and replace it with a 70V/100V backplate on which the module is integrated, the high performance loudspeaker is able to apply in a 70V/100V system.

    The construction of the cabinets is made of 12mm plywood with a polyurethane coating, making it resistant for any impact. The front side of the cabinet is finished with a powder coated steel grill with acoustical foam. A recessed carry handle on the rear side makes carrying easy. Positioning and suspension of the speaker is easily achieved by using the standard 35 mm pole adapter on the bottom and the M10 rigging points. Two speaker connectors provide reliable connections with easy link-through to cabinets.

    The optional Clever U bracket allows mounting the high power 2-way cabinet both horizontally and vertically. An inclination of 90° in both directions ensures an optimal positioning. The optional MBK bracket even allows mounting the VEXO series to the ceiling which gives the opportunity to install the loudspeaker cleanly in any environment.

    391,67