• Toode lisati ostukorvi:

    Audac TR2050 Eraldustrafo 2x RCA-M -2x RCA-F

    Kohatäide
    0 out of 5

    Audac TR2050 Eraldustrafo 2x RCA-M -2x RCA-F

    The TR2050 is a basic ground loop isolator designed to electrically isolate audio devices from each other. Hum in audio systems is usually caused by ground loops in the system. A common mode current will flow in a ground loop created by an electrical system that has grounds on different voltage potentials. This results in a 50 Hz hum in the audio signal. The most common method to solve these problems is an audio isolation transformer such as the TR2050 which always need to be in reach for every audio technician. When ground loop problems are encountered, these can be solved in a jiffy, by using the TR2050.

    8,92 
  • Toode lisati ostukorvi:

    Audac TR266 Eraldustrafo 1:1/600Ω

    Kohatäide
    0 out of 5

    Audac TR266 Eraldustrafo 1:1/600Ω

    The AUDAC TR266 is a super shielded true isolation audio transformer which is especially designed to be used in highly polluted EMI environments. Hum in audio systems is usually caused by ground loops in the system. A common mode current will flow in a ground loop created by an electrical system that has grounds on different voltage potentials. This results in a 50 Hz hum in the audio signal.The most common method to solve these problems is an audio transformer. The AUDAC TR266 audio isolation transformer with an in- and output impedance of 600 Ohm and a turns ratio of 1 : 1 has a very wide bandwidth and very low distortion which ensures a non distorted bass response and non attenuated high frequencies. Thanks to its MU-metal shielding, it can guarantee the best performance in even the most EMI polluted environments. MU-Metal is a soft ferromagnetic material with a very high magnetic permeability. It consists of an alloy of Nickel, Iron, Copper and Molybdenum. MU-Metal has a magnetic shielding effectiveness going from 100x up to 1000x higher than steel of equivalent thickness. It is especially good in 50/60hz type applications where all other shieldings fail. The TR266 super shielded transformer can be used for applications where the shielding of standard transformers becomes inadequate. A typical example of such an application is the broadcast system in railway stations.

    41,67 
  • Toode lisati ostukorvi:

    Audac TR2050 Eraldustrafo 2x RCA-M - 3,5mm pulk

    Kohatäide
    0 out of 5

    Audac TR2050 Eraldustrafo 2x RCA-M – 3,5mm pulk

    The TR2060 is a basic ground loop isolator, designed to electrically isolate audio devices from each other. Hum in audio systems is usually caused by ground loops in the system. A common mode current will flow in a ground loop created by an electrical system that has grounds on different voltage potentials. This results in a 50 Hz hum in the audio signal. The most common method to solve these problems is an audio isolation transformer such as the TR2060 which always need to be in reach for every audio technician. When ground loop problems are encountered, these can be solved in a jiffy, by using the TR2060.

    8,92 
  • Toode lisati ostukorvi:

    Audac TR106 Eraldustrafo 1:1/600Ω

    Kohatäide
    0 out of 5

    Audac TR106 Eraldustrafo 1:1/600Ω

    The AUDAC TR106 is a shielded true isolation audio transformer. Hum in audio systems is usually caused by ground loops in the system. A common mode current will flow in a ground loop created by an electrical system that has grounds on different voltage potentials. This results in a 50 Hz hum in the audio signal. The most common method to solve these problems is an audio transformer. The AUDAC TR106 audio isolation transformer with an in- and output impedance of 600 Ohm and a turns ratio of 1 : 1 has a very wide bandwidth and very low distortion which ensures a non distorted bass response and non attenuated high frequencies.

    25,92 
  • Toode lisati ostukorvi:

    Audac TR2050 Eraldustrafo 3,5mm pistik - 3,5mm pesa

    Kohatäide
    0 out of 5

    Audac TR2050 Eraldustrafo 3,5mm pistik – 3,5mm pesa

    The TR2070 is a basic ground loop isolator, designed to electrically isolate audio devices from each other. Hum in audio systems is usually caused by ground loops in the system. A common mode current will flow in a ground loop created by an electrical system that has grounds on different voltage potentials. This results in a 50 Hz hum in the audio signal. The most common method to solve these problems is an audio isolation transformer such as the TR2070 which always need to be in reach for every audio technician. When ground loop problems are encountered, these can be solved in a jiffy, by using the TR2070.

    8,92 
  • Toode lisati ostukorvi:

    Audac ATU44MK2 Sisendadapter universaalne

    ATU44-MK2-Small
    ATU44-MK2-Small
    0 out of 5

    Audac ATU44MK2 Sisendadapter universaalne

    Universaalne sisendi konverter

    68,00 
  • Toode lisati ostukorvi:

    Audac ALI20MK2 Liini isolaator 2x

    ALI20MK2-Small
    ALI20MK2-Small
    0 out of 5

    Audac ALI20MK2 Liini isolaator 2x

    Stereo helisignaali eraldustrafo 1:1 600Ω.
    Sisend-väljund XLR pesadega.
    Maanduse eralduslüliti.

    102,00 
  • Toode lisati ostukorvi:

    Datavideo 2 Channel Audio 1:1 transformer

    DAC-80-output-nonsquare13042020115309
    DAC-80-output-nonsquare13042020115309DAC-80-input-nonsquare13042020115114
    0 out of 5

    Datavideo 2 Channel Audio 1:1 transformer

    2 Channel Audio 1:1 transformer

    115,00