• Toode lisati ostukorvi:

    Power amplifier kit

    Kohatäide
    0 out of 5

    Power amplifier kit

    The POW2 is an optional power amplifier kit which can be installed inside the R2 and M2 Multi-Zone Digital Audio Matrix housing. In its standard configuration, the R2 or M2 is equipped with 8 line level output channels on which the appropriate amplifiers can be connected, depending on the required power for the specific application. For certain applications where no large power capacities are required, the optional power amplifier kit can be installed, resulting in a multifunctional matrix and power amplifier merged into one single housing. The POW2 consists of a 16 channel (8 Stereo channel) Class-D amplifier, delivering a power of 60 Watt to every channel at 4 Ohm. In bridge mode, an output power of 8 x 120 Watt can be obtained at 8 Ohm. It features an advanced protection circuit which protects against DC malfunctioning, short circuit, overheating and overload while a large heatsink and speed controlled ventilation fan ensure a proper operation temperature is continuously maintained. The POW2 power amplifier kit includes the power amplifier module, a switching power supply and all necessary connection and installation accessories to properly install the kit inside the R2 or M2’s housing. Note: The POW2 replaces the older R2POW model, which offered comparable functionality and performance.

    832,50 
  • Toode lisati ostukorvi:

    Audac RMT40 Distantsjuhtimispult universaalne

    Kohatäide
    0 out of 5

    Audac RMT40 Distantsjuhtimispult universaalne

    The RMT40 remote controller can be used in combination with a variety of audio source devices. It features 13 buttons with various functions depending on the unit it is connected to.

    2.4 GHz wireless technology offers a transmission distance up to ~ 10 meters, allowing out-of-sight operation which is a great advantage compared to regular IR remote control systems. An included USB type receiver shall be connected to the provided USB slot on the audio source device. Transmitters and receivers are matched with unique ID’s, allowing simultaneous operation of multiple systems without disturbance while receiver extension is possible using USB extension cables when installed in closed/shielded cabinets.

    It is constructed of high-quality ABS materials with a brushed look finishing, giving it stylish elegant appearance while rubber-type buttons offer a comfortable feel. The transmitter is powered by 2 x AAA (included) batteries.

    Discover more about our modular audio players

    19,75 
  • Toode lisati ostukorvi:

    Audac RGA12 DAB/DAB+ välisantenn

    Kohatäide
    0 out of 5

    Audac RGA12 DAB/DAB+ välisantenn

    DAB signal is superior for those who have imperfect signal or a low quality system. The RGA12 antenna is optimized for best DAB+ signal reception. The construction allows antenna assembly around any pole with a 30~50 mm diameter, while the aluminum construction is resistant for permanent outdoor exposure to the elements. Connections are made using an included F-type connector.

    40,67 
  • Toode lisati ostukorvi:

    Audac M2DIS 7” puuteekraan M2-le

    M2DIS-Small
    M2DIS-Small
    0 out of 5

    Audac M2DIS 7” puuteekraan M2-le

    The M2DIS is an optional display unit with touchscreen which can be installed internally in the front panel of the M2 Multi-Media Digital Audio Mixer. This unit consists of a 7” TFT display panel with a resolution of 800 x 480 px that is fitted with a resistive touch-screen panel. It is controlled by a powerful 32 bit processor which communicates directly with the M2’s DSP processor. This unit allows the user to operate the control functions of the matrix systems without any external equipment. So it is now possible to set up zone selection or input mixing without any external devices. This can be useful when the system is installed in a technical room where no external control devices are within reach.

    625,00 
  • Toode lisati ostukorvi:

    Audac CPE100 Käepidemed CAP ja CPA võimenditele

    CPE100-Small
    CPE100-Small
    0 out of 5

    Audac CPE100 Käepidemed CAP ja CPA võimenditele

    These screwable brackets can be attached to the front of a CPA/CPR unit and allows you to remove the unit from the rack in which it is installed more easily.

    6,58 
  • Toode lisati ostukorvi:

    Audac RGA10 FM välisantenn

    Kohatäide
    0 out of 5

    Audac RGA10 FM välisantenn

    The RGA10 is an omnidirectional outdoor antenna for FM radio reception. The circular construction allows antenna assembly around any pole with a 30~50 mm diameter, while the aluminum construction is resistant for permanent outdoor exposure to the elements. Connections are made using an included F-type connector.

    33,33