The PX series are compact full range loudspeaker cabinets for a wide variety of indoor applications. They come in four different models, each of them with different size and performance meeting the requirements for every specific application. The PX112 is the 12” model of the PX family, consisting of a 12” high output woofer and a compression driver with 1.3” voice coil. The compression driver is fitted with a 90° x 75° coverage horn which can be rotated allowing both horizontal and vertical use. Thanks to the high quality components and an accurately optimized integrated passive crossover network with tweeter overload protection, the PX112 delivers a clear and natural sound with an RMS power of 300 Watt and a maximum power of 600 Watt. The frequency range (-10 dB) starts from 55 Hz up to 20 kHz and the sensitivity (1W / 1m) reaches 100 dB while a maximum continuous sound pressure level from 125 dB can be achieved. The construction of the cabinets is made of medium density fiberboard with a durable textured and scratch resistant EPDM coating. The front side of the cabinet is finished with a powder coated steel grill lined with acoustically transparent backing. Recessed carry handles on both sides of the cabinet make carrying easy. Positioning and suspension of the speaker is easily achieved by using the standard 35 mm pole adapter on the bottom side and M10 rigging points. An optional mounting bracket provides a complete solution for wall mounting. Two speaker connectors on the rear side of the cabinet provide reliable connections with easy link-through to other cabinets.
The SLC346 is a Sound Level Calibrator device which can be used to calibrate the AUDAC SLM700 or any other Sound Level Meter, or can be used as a reference for any other sound calibrations. Because of regulations, the sound level should be monitored at many different locations to prevent ear damage and noise nuisance. To make sure the measurements are reliable,the accuracy of the sound level meters should be regularly verified. The AUDAC SLC336 Sound Level Calibrator is the perfect companion for this job. It is easy to operate, provides two different sound levels (94 dB and 114 dB) at a frequency of 1 kHz and can be used to calibrate all kinds of sound measurement devices. For example, the testing of paging microphones, … It features a standard opening for 1” microphones, and comes with an ½” microphone adapter. The SLC346 is supplied with: – Soft carrying bag – ½” microphone adapter – 9V battery