900,00 €
Adds Omnia μMPX (micro MPX) encoding with 2 output streams, allowing you to transport a compressed MPX signal at bitrates from 320 to 576 kbps to a μMPX Decoder over an IP link. (Requires MKII upgrade.) Up to 16 unicast or Multicast streams are supported. Bandwidth requirements will vary based on stream type & number, bit rate and error correction settings.
RODE NTG3B Precision broadcast-grade super cardioid shotgun mic. Withstands adverse environmental conditions. Matte black finish
RODE NTG3B Precision broadcast-grade super cardioid shotgun mic. Withstands adverse environmental conditions. Matte black finish
The RØDE NTG3 super-cardioid shotgun microphone is designed for professional use on film, television, electronic news gathering and wherever high-resolution broadcast audio is required.
Sennheiser headset cable, XLR-5M connector, 2 m
Sennheiser headset cable, XLR-5M connector, 2 m. Compatible with the HMD 300 PRO, HMD 301 PRO, HMD/HME 26-II and the HMD/HME 27 PRO
RODE AI1 Ai-1 Single channel Audio interface with combo XLR/instrument input, High quality headphone amp and Balanced 1/4" outputs
RODE AI1 Ai-1 Single channel Audio interface with combo XLR/instrument input, High quality headphone amp and Balanced 1/4″ outputs
RØDE’s AI-1 Audio Interface is packed with incredible technology to ensure recording on your computer is easy, versatile and sounds superb. The AI-1’s single input is a NeutrikTM Combo Jack, which takes both a 3-pole XLR (common to most microphones) and a quarter-inch jack common to most electric instruments like guitar, bass et al. Layering tracks is as easy as plug in, set level and go. Not only does the AI-1 deliver crystal clear audio to your computer software, but headphones have never sounded sweeter thanks to the discrete studio-quality headphone output and level control.
RODE 300MM Y-SPLIT TRS-TRS CABLE
High-quality shielded patch cable
Dual TRS output
275mm (10.8”) long
The SC11 is a TRS splitter cable for connecting two mono outputs to a single stereo input. It is particularly suitable for connecting two microphones to a single DSLR-style camera, for example dual Wireless GO receivers, or a wireless receiver and a VideoMic. The SC11 is 275mm in length and is compatible with the cable management slots in the RØDE SM7-R and DCS-1 mounts. The output segment has in-built memory wire for neat cable positioning around your camera and the input segment is split into two – the black end records to the left channel, the red end records to the right.
RODE S1B Live performance super cardioid condenser microphone. Black finish.
RODE S1B Live performance super cardioid condenser microphone. Black finish.
The Rode S1 is a supercardioid handheld microphone designed to deliver studio level quality signal response, in live sound applications. The supercardioid element effectively minimizes noise and signal at the off-axis sections of the microphone element. The result provides high gain before feedback when near monitor speakers, while eliminating signal from adjacent instruments and singers. It’s 20Hz to 20kHz frequency response is tailored for vocal capturing and an SPL rating of 151dB ensures accurate reproduction of transient signals without distortion. The S1 is powered with 44v to 52v phantom power.
RODE SVMPR Stereo VideoMic Pro with Rycote Lyre Suspension Mount
RODE SVMPR Stereo VideoMic Pro with Rycote Lyre Suspension Mount
Rycote® Lyre® shock mounting onboard
Broadcast recording quality on-camera microphone
All new matched pair 1⁄2” condenser capsules in XY stereo configuration
Improved foam windscreen
Ultra lightweight, compact form factor
On mic power and EQ controls
Two step High Pass Filter (flat, 75Hz)
Three position level control (-10dB, 0, +20dB)
9V battery powered – over 100 hours use (alkaline)
New Kevlar reinforced braided cable
Billeted metal camera shoe mount with 3/8” thread for easy boompole mounting
10 year extended warranty when you register your microphone
