ATOMOS 5″ Ninja V Pro Kit

ATOMOS 5″ Ninja V Pro Kit

1 190,00 

ATOMOS Ninja V Pro Kit

Saadavus: 1 laos (saab järeltellida) Tootekood: ATOMNJVP01 Kategooria:
  • Kirjeldus
  • Lisainfo


The ATOMOS Ninja V Pro Kit has been designed to bridge the gap between compact cinema and mirrorless cameras that can output RAW via HDMI or SDI. Pro Kit also pushes the limits of these cameras, recording up to 6K 12-bit RAW* externally on the Ninja’s onboard SSD. Pro Kit also provides the ability to cross convert signals providing a versatile solution for monitoring and playout/review.


Adding dual 12G SDI connectivity expands the compatibility with other cameras to provide offboard 10-bit 422 recording in edit ready codecs or as proxy files from RED or Arri cameras allowing the file naming and timecode from the camera to also be carried via SDI to the recorded files.

And of course the Ninja V also provides support for RAW over HDMI from our evergrowing roster of mirrorless cameras including the Sony Alpha 7S III, Z CAM E-2 Series, Nikon Z-Series, Lumix S Series, Olympus OM-D EM-1X, Olympus OM-D M1 MkIII and more.


Camera Manufacturer Compatible cameras (RAW over SDI)


FX9 with XDCA-FX9

RAW output at up to 4k DCI p60 and 2k p180


RAW output up to 4k DCI p60


Varicam LT

RAW output up to 4k p60 and high frame rate up to 2k p240


RAW output up to 5.7k p30 and high frame rate up to 2k p240




Both offering RAW up to 4k DCI and 4k UHD at up to p30

Note: Sony FS700, FS5 and FS7 are NOT supported

In playback mode the Ninja V Pro Kit provides a lossless signal distribution with 2 x 12G SDI and 1 x HDMI 2.0 for simultaneous outputs up to 4K p60. When used in combination with the Ninja’s playlist functionality it provides a fast and convenient way to review content or show a highlight reel. RAW inputs can also be de-bayered in real time and non-standard high resolutions are processed to SMPTE standard output formats. Convert to HLG, PQ or your choice of 3D LUT can also be applied allowing for RAW or LOG content to be viewed with the correct application of artistic intent.

The Pro Kit offers 3 ways to power your Ninja

  • In the Studio you can use the included DC power supply with lockable jack to connect to the Ninja V and with the international power plugs you’ll be covered wherever your work might take you.
  • On-set via the included DTap cable to connect to your choice of battery with a DTap output meaning your camera rig can run from a single power source.
  • On the move with a compact rig you also have the choice to run the Ninja directly from an optional NPF battery or any 4 cell NPF you might have in your kit bag.

Ninja V (RAW over SDI Pre-Activated), AtomX SDI module, 1 x Battery eliminator, 1 x international DC power supply , 1 x DTap Cable, 1 x AtomX 5″ Sunhood.