Procab CLV215A/30 HDMI A male – HDMI A male – Active optical – HighFlex™ 30 meter

Procab CLV215A/30 HDMI A male – HDMI A male – Active optical – HighFlex™ 30 meter

204,17 

Procab CLV215A/30 HDMI A male – HDMI A male – Active optical – HighFlex™ 30 meter

Saadavus: Saadaval järeltellimisel Tootekood: 5414795046382 Kategooria:
Võrdle
  • Kirjeldus

Kirjeldus

CLV215A 

HDMI A male – HDMI A male/HDMI D (Micro-HDMI) male – Active optical – Fixed and detachable connector

PROCAB AV & IT
 

 

 

 

Optical fiber
Gold Plated
LSHF
4K Ultra HD
 
HDMI High Speed with Ethernet
 

The CLV215A is an active optical HDMI 2.0 cable aimed for fixed installations. It is able to transmit resolutions up to ultra HD 4K 2160p (4096 x 2160) at 60 Hz with a bandwidth of 18Gbps via OM3 fiber optical fiber technology, eliminating the possibility of electronic interference. The fixed and detachable HDMI connector enable you to easily detach and reattach this connector. This way the cable can be fitted through holes and straight tubes with diameters as small as 25 mm.

The CLV215A comes with a USB A to USB Micro B cable included, which is an accessory only required when the HDMI port on the transmitter side is delivering insufficient voltage (typically required when < 4.8 V) for powering the receiver end. The power is transferred from transmitter end to receiver end over the CLV215A cable.

Most general HDMI sources deliver sufficient voltage making the additional cable unnecessary. However typical applications where it might be required are e.g. streaming media player boxes, which might deliver insufficient voltage over their HDMI output.

 

 

Product Features
Series Classic Series
Application AV & IT
Accessories Included COP110
    Screwdriver
    Pulling capsule case
    USB power cord (Optional use on RX side)
  Optional COP140
Physical Characteristics
Outer jacket Colours Black
Inner conductor Insulation Material PE 0.9 mm (Ø)
      PE 1 mm (Ø)
  Shielding Aluminium foil Al-mylar, 100% coverage – 25% Overlap
    Drain wire TC 11 x 0.08 mm (Ø) (OFC)
Overall shielding Aluminium foil Al-mylar, 100% coverage – 25% Overlap
Outer jacket Material LSHF 4.5 mm (Ø)
Strength test Bending radius 20 mm
  Tensile strength test 25 kg
  Connector bending test > 10000 cycles
  Connector pull out force 2 kg
Inner conductor Material TC 11 x 0.08 mm (Ø) (OFC)
    TC 19 x 0.08 mm (Ø) (OFC)
    TC 30 x 0.08 mm (Ø) (OFC)
    TC 41 x 0.08 mm (Ø) (OFC)
    50/125 OM3 / Fiber (4x)
  Section 0.05 mm²
    0.08 mm²
    0.14 mm²
    0.25 mm²
  Number of conductors 12
  Conductor twisting Yes
Mechanical Characteristics
Temperature range Fixed installation – 0 °C till + 75 °C