-
Audac CPB115R Kõlarikott PX115-le
36,00 €The CPB series are heavy duty splash waterproof speaker bags especially designed for the protection and handling of the AUDAC PX and RX speakers in all possible situations. The design ensures that it is possible to reach the connections, place the speaker on a stand and carry the speaker using the speaker handles even when the cover bag is attached. When not used, all these openings can be covered with a stitched flap from the same material. The front of the bag can be opened with a zipper to use the speaker without removing the bag. During transportation and storage, the front can be closed to avoid any damage to the speaker. The bags are made out of extra strong, water repelling polyester with heavy duty stitching and are finished with small rubber feet. The inside has a special soft coated protection to avoid structural damages.
-
Toode lisati ostukorvi:
Audac CP45ARPJ/W Pesapaneel repiiteriga RJ45, 45x45mm, valge
Audac CP45ARPJ/W Pesapaneel repiiteriga RJ45, 45x45mm, valge
46,58 €The CP45ARP allows you to attach one APM paging console on the front, while the phoenix connector on the back lets you route the signal to a next paging console or junction box. It can offer 20V power to the APM console and is also equipped with 2 jumpers to terminate the audio -or databus. An advantage the ARP version has over the ARJ version is that it also offers a built-in repeater. This repeater extends the maximum distance from 300m to 600m. The 45 x 45 mm size is compatible with AUDAC, Niko, Legrand and other standard 45 x 45 mm Mounting frames and cover plates.
-
Toode lisati ostukorvi:
Quad-channel power amplifier 4 x 480W 100V
Quad-channel power amplifier 4 x 480W 100V
1 137,83 €Quad-channel power amplifier 4 x 480W 100V
-
WaveDynamics™ dual-channel power amplifier 2 x 500W
689,25 €WaveDynamics™ dual-channel power amplifier 2 x 500W
-
Toode lisati ostukorvi:
Connection cable with 5-pin awx5 connector
Connection cable with 5-pin awx5 connector
10,17 €Connection cable with 5-pin awx5 connector 2.5 meter, white colour
-
Toode lisati ostukorvi:
Front grill for CALI6 series with cloth & outdoor treatment
Front grill for CALI6 series with cloth & outdoor treatment
10,25 €Front grill for CALI6 series with cloth & outdoor treatment Black version
-
Toode lisati ostukorvi:
Audac CMX700BJ Elektreet kõrvamikrofon, must, 3,5 pulkpistik
Audac CMX700BJ Elektreet kõrvamikrofon, must, 3,5 pulkpistik
36,50 €The CMX700 is an omnidirectional clip-on ear microphone designed for vocal and speech applications. Thanks to the flat frequency response characteristic which guarantees high-fidelity sound reproduction, voices will be reproduced in a natural way. Because of the EMI and low noise suppression, low frequencies are repressed, shutting out hum and interference caused by other sources, which improves the sound reproduction quality, making it suited for vocal applications. The unique tiny size and super light weight provide a comfortable and optimum fit for any occasion. It is available in black and beige with two different connector versions, 3.5mm Mini-Jack and 4-Pole Mini-XLR.
-
12″ high performance 2-way active loudspeaker
990,00 €12″ high performance 2-way active loudspeaker White version
-
Audac CPB112P Kõlarikott PX112-le
36,00 €The CPB series are heavy duty splash waterproof speaker bags especially designed for the protection and handling of the AUDAC PX and RX speakers in all possible situations. The design ensures that it is possible to reach the connections, place the speaker on a stand and carry the speaker using the speaker handles even when the cover bag is attached. When not used, all these openings can be covered with a stitched flap from the same material. The front of the bag can be opened with a zipper to use the speaker without removing the bag. During transportation and storage, the front can be closed to avoid any damage to the speaker. The bags are made out of extra strong, water repelling polyester with heavy duty stitching and are finished with small rubber feet. The inside has a special soft coated protection to avoid structural damages.
-
Toode lisati ostukorvi:
Audac CS85/W Kõlar süvistatav 2-ribaline 8"/1" - 8Ω/100v, 40/24/12/6W, valge
Audac CS85/W Kõlar süvistatav 2-ribaline 8″/1″ – 8Ω/100v, 40/24/12/6W, valge
53,08 €The CS series loudspeakers are high-quality in-ceiling loudspeakers, delivering exceptional sound quality and value for a wide variation of applications, ranging from paging and announcements to background music systems in a wide range of business applications, including hotels, restaurants and pubs, corporate offices, retail stores, etc. The CS85 in-ceiling loudspeaker features a 8” driver with a coaxially mounted 1” tweeter, having a continuous power handling of 40 Watt and a maximum power handling of 80 Watt. The 2-way construction makes the CS85 the perfect match for a wide variation highly demanding of applications, guaranteeing a high-quality reproduction of music and speech with true and deep performance in the low frequency range. This guarantees a true Hi-Fi experience. The moisture proof treatment on the speakers’ cone and aluminum front grill protects it for installation in humid or outdoor environments. A multi-tapping line transformer fitted with Fast-con™ allows fast and smooth connections to 100 Volt public address or low impedance systems. The mounting of the loudspeaker into the ceiling is achieved with a Quick-fix mechanism, offering a great installers convenience and lifetime stability. The construction of the speakers’ housing is made out of high-quality ABS, while the front is covered by a solid powder-coated aluminum grille. It comes available in different colours, while custom painting is possible for a total blending into any environment.
-
Toode lisati ostukorvi:
Dual-channel power amplifier 2 x 240W 100V
Dual-channel power amplifier 2 x 240W 100V
673,17 €Dual-channel power amplifier 2 x 240W 100V
-
Toode lisati ostukorvi:
Safelatch™ 2-way 6.5" ceiling speaker with Twist-Fix™ grill
Safelatch™ 2-way 6.5″ ceiling speaker with Twist-Fix™ grill
172,17 €Safelatch™ 2-way 6.5″ ceiling speaker with Twist-Fix™ grill White
-
Audac CPB108P Kõlarikott PX108-le
30,58 €The CPB series are heavy duty splash waterproof speaker bags especially designed for the protection and handling of the AUDAC PX and RX speakers in all possible situations. The design ensures that it is possible to reach the connections, place the speaker on a stand and carry the speaker using the speaker handles even when the cover bag is attached. When not used, all these openings can be covered with a stitched flap from the same material. The front of the bag can be opened with a zipper to use the speaker without removing the bag. During transportation and storage, the front can be closed to avoid any damage to the speaker. The bags are made out of extra strong, water repelling polyester with heavy duty stitching and are finished with small rubber feet. The inside has a special soft coated protection to avoid structural damages.
-
Toode lisati ostukorvi:
Front grill for CALI6 series with cloth & outdoor treatment
Front grill for CALI6 series with cloth & outdoor treatment
10,25 €Front grill for CALI6 series with cloth & outdoor treatment Paintable version
-
In-ceiling/wall back-box for flush mount ceiling speakers
64,17 €In-ceiling/wall back-box for flush mount ceiling speakers
-
ARES5A wall panel – Microphone & line input – 80 x 80 mm
61,42 €ARES5A wall panel – Microphone & line input – 80 x 80 mm White version
-
Süvistatav laekõlar Audac CIRA824/W
73,83 €QuickFit™ 2-way 8″ ceiling speaker with TwistFix™ grill White version, 8Ω & 24 Watt @ 100V
-
Toode lisati ostukorvi:
Audac DMP40 SourceCon™ moodul DAB/DAB+ ja FM tüüner
Audac DMP40 SourceCon™ moodul DAB/DAB+ ja FM tüüner
109,17 €The DMP40 is a professional DAB/DAB+ & FM tuner featuring SourceCon™ modular technology. This unique technology guarantees true plug & play implementation to any compatible device. When inserted to a supporting slot, the module is instantly installed, discovered and ready for operation without requiring any additional internal wiring or complex configuration. The DMP40 provides access to a wide variation of radio stations while guaranteeing a high-quality audio reproduction. Station selection can be done manually or automatically, while up to 10 preferred channels can be internally stored and recalled. Radio station information carried by RDS / Radiotext can be retrieved, while other functions such as mono/stereo switching (FM) always guarantee the best possible audio clarity. The signal output level is user-configurable, while dynamic range compression (DRC) is supported, improving the intelligibility for low volumes in applications with high levels of background noise. Signal reception strength can be retrieved from the module and indicated on the graphical interface of the controlling device. The antenna input is implemented by an F-type connector on its panel, allowing connection of the included antenna cable or any other external antenna using 75 O coaxial cabling. The balanced stereo line output is connected through two 3-pin terminal block connections.
Please note: An outdoor antenna is necessary for DAB/DAB+ reception. For DAB/DAB+ reception we suggest the RGA12 outdoor DAB/DAB+ antenna.
-
Audac WP523/W Sisendpaneel LX523 kõlarile, valge
51,33 €The WP523 is a remote wall mixer which is meant to be used in combination with the LX523 active speaker system. It converts the signal coming from a stereo line-level audio source (such as CD-player, tuner, MP3 player, … ) or balanced microphone to the level corresponding the differential signal input on the LX523 (RJ45) making it possible to transfer high-quality audio over long distances between the wall panel and the loudspeaker, by just using inexpensive twisted pair CAT5 cabling. On the front side of the wall panel, there is a stereo RCA line input available together with a balanced XLR microphone input, both provided with their own knob which allows the signals to be mixed together. A main volume dial allows you to adjust the overall volume of the loudspeaker system. The mixing potentiometers are level with the surface and both equipped with a Push-Lock mechanism. They can be opened and hidden again by pressing it. An internal limiter avoids distortion on the input signal and intervenes when the level of the input signal reaches the clipping level. The ‘Clip’ LED located above the mixing potentiometer will illuminate when it’s recommended to reduce the level. This should be done by turning back the potentiometer. A jumper on the rear side of the panel allows you to enable the 12V phantom power for the microphone input. The connection of the wall panel should be done with twisted pair UTP CAT5 cabling whereby distances up to 500 meters can be reached. It should be connected to the 8-pin Euro-Terminal Block connector on the rear side of the panel. Available in black (/B) and white (/W).
-
Universal wall panel – Bluetooth receiver input – 80 x 80 mm
119,17 €Universal wall panel – Bluetooth receiver input – 80 x 80 mm White version
-
WaveDynamics™ quad-channel 70/100V power amplifier
1 249,75 €WaveDynamics™ quad-channel 70/100V power amplifier
-
Toode lisati ostukorvi:
Octo channel 4 Ohm energy-efficient amplifier - 8 x 30W - 70/100V
Octo channel 4 Ohm energy-efficient amplifier – 8 x 30W – 70/100V
643,17 €Octo channel 4 Ohm energy-efficient amplifier – 8 x 30W – 70/100V
-
100V volume controller 20W 80 x 80 mm
18,50 €100V volume controller 20W 80 x 80 mm 100v wall volume controller
-
Toode lisati ostukorvi:
Quad-channel power amplifier 4 x 240W 100V
Quad-channel power amplifier 4 x 240W 100V
1 036,92 €Quad-channel power amplifier 4 x 240W 100V
-
Audac PX115MK2/OB Kastkõlar väliskasutuseks 2-ribaline 15″/1,3″ – 8Ω/300W, must
641,00 €The PX series are compact full-range loudspeaker cabinets for a wide variety of indoor or outdoor applications. They come in four different models, each of them with different size and performance meeting the requirements for every specific application. The PX115 is the 15” model of the PX family, consisting of a 15” high output woofer and a compression driver with 1.3” voice coil. The compression driver is fitted with a 90° x 75° coverage horn which can be rotated allowing both horizontal and vertical use.
Thanks to the high-quality components and an accurately optimized integrated passive crossover network with tweeter overload protection, the PX115 delivers a clear and natural sound with an RMS power of 300 Watt and a maximum power of 600 Watt. The frequency range (-10 dB) starts from 45 Hz up to 20 kHz and the sensitivity (1W / 1m) reaches 100 dB while a maximum continuous sound pressure level from 125 dB can be achieved.
The construction of the outdoor cabinets is made of dense plywood treated with a special weatherproof surface finish. After this treatment the cabinets are painted with UV resistant high-quality paint the withstand summer heat. The front side of the cabinet is finished with a powder-coated steel grill fixed in place by anti-rust inox screws. Recessed carry handles on both sides of the cabinet make carrying easy.
Positioning and suspension of the speaker are easily achieved by using the standard 35 mm pole adapter on the bottom side and M10 rigging points. An optional mounting bracket provides a complete solution for wall mounting. Two speaker connectors on the rear side of the cabinet provide reliable connections with easy link-through to other cabinets.
-
Audac XENO8/C Kõlar pinnapealner 2-ribaline 8″/1″, 8Ω/120W, kreemjas
158,13 €The XENO series is a loudspeaker range specifically designed for fixed audio installations in modern environments, offering two different sizes of contemporary and elegant designed products. What makes them so unique is their full range audio design, allowing them to be used without additional bass cabinet.
The XENO8 is the 8” version, with a 1” dome tweeter and an 8” Mid /Low-frequency driver, ensuring a true-to-nature, high-fidelity reproduction of music and speech. This wooden cabinet is fitted with a slim and elegant front grill. This makes the loudspeaker suitable for environments where the music is the key element, but without making any compromises on its design. This ranges from modern and trendy clubs to pubs and dance bars where that little extra punch and depth in the music is appreciated.
The sleek and elegant design guarantees the loudspeaker to blend in with any environment. It delivers a powerful full-range sound with an RMS rating of 120 Watt and a maximum of 240 Watt. The advanced integrated protection circuit avoids tweeter damaging when an overload occurs.
The included mounting bracket makes it possible to mount the loudspeaker in both horizontal and vertical position, up to 20°, making it suitable for every application. The connections can be made on the rear side of the loudspeaker with a Euro Terminal block connector. Ships with 2mm safety cable with a PVC jacket. All XENO series speakers are available in black (/B) or white (/W).
-
Audac MBK110/W Paigaluskronstein PX110 kõlarile, valge
38,25 €The MBK110 series mounting brackets are especially designed for the mounting of the AUDAC PX series speakers. These black brackets allow mounting the speakers in any possible situation. For the mounting of the PX series speaker with the corresponding bracket, the pole flange adapter in the bottom of the speaker has to be replaced with a screw flange adapter, which is included. They are constructed of solid steel, and come with all the necessary parts for safe mounting, such as 2 M10 bolts and a safety cable with M10 eye bolt mounting. This bracket is also available in white, MBK110/W
-
Toode lisati ostukorvi:
Audac CPE100 Käepidemed CAP ja CPA võimenditele
Audac CPE100 Käepidemed CAP ja CPA võimenditele
6,58 €These screwable brackets can be attached to the front of a CPA/CPR unit and allows you to remove the unit from the rack in which it is installed more easily.
-
Audac RGA10 FM välisantenn
33,33 €The RGA10 is an omnidirectional outdoor antenna for FM radio reception. The circular construction allows antenna assembly around any pole with a 30~50 mm diameter, while the aluminum construction is resistant for permanent outdoor exposure to the elements. Connections are made using an included F-type connector.
-
Light track adapter mount for ATEO4 – 3-Phase Track
26,50 €Light track adapter mount for ATEO4 – 3-Phase Track White version
-
Toode lisati ostukorvi:
Audac CMX720BJ Elektreet peamikrofon, must, 3,5 pulkpistik
Audac CMX720BJ Elektreet peamikrofon, must, 3,5 pulkpistik
41,67 €The CMX720 is an omnidirectional headset microphone designed for vocal and speech applications, ranging from speeches to aerobic lessons. The flat frequency response and the high Sound Pressure level ensure a high-fidelity sound reproduction, true to the user’s voice and intonation, even when a hard and vigorous sound is applied. The omnidirectional pattern reduces the feedback to a minimum. The tiny design doesn’t decrease its performance, but enhances the user’s comfort and makes wearing it almost unnoticable, both to speaker and audience. It is available in Black with mini-jack or mini-XLR connector.
-
Setup box installation accessories
20,25 €Setup box installation accessories Mounts two units into a 19” equipment rack (1 HE)
-
Toode lisati ostukorvi:
Compact wall speaker with CleverMount™ 2"
Compact wall speaker with CleverMount™ 2″
37,00 €Compact wall speaker with CleverMount™ 2″ Black version – 16Ω
-
Wall line input – 45x45mm – terminal block
69,33 €Wall line input – 45x45mm – terminal block Wall line input – 45×45 mm- terminal block – white
-
10″ high performance 2-way loudspeaker
450,42 €10″ high performance 2-way loudspeaker White version
-
Toode lisati ostukorvi:
Connection cable with dual steel core, snap hook & open ends - 10 meter
Connection cable with dual steel core, snap hook & open ends – 10 meter
46,17 €Connection cable with dual steel core, snap hook & open ends – 10 meter White
-
Toode lisati ostukorvi:
Audac CSW55 Kõlar süvistatav evakuatsiooni LED-ga, 4" - 8Ω/100V, 15/6/3/1,5W
Audac CSW55 Kõlar süvistatav evakuatsiooni LED-ga, 4″ – 8Ω/100V, 15/6/3/1,5W
43,75 €The CSW55 is a professional ceiling speaker with an integrated white LED unit which can be used as visible alarm signal. It features a 4 1/3″ single cone loudspeaker which is capable of producing up to 10 Watt RMS, with a maximum of 20 Watt and it ensures good reproduction of speech and background music in all situations. The speaker is fitted with a 100V line transformer and there are different power taps available for 6 Watt, 3 Watt and 1.5 Watt at 100V. The integrated White unit deliver a light intensity of 24 Lumen on a supply voltage of 24V DC.
-
Flush mount box for AUDAC wallpanel – hollow wall
7,42 €Flush mount box for AUDAC wallpanel – hollow wall
-
10″ high performance 2-way active loudspeaker
792,92 €10″ high performance 2-way active loudspeaker Black version
-
Toode lisati ostukorvi:
Audac CP45PE/B Pesapaneel Speacon kõlaripesa, 45x45mm, must
Audac CP45PE/B Pesapaneel Speacon kõlaripesa, 45x45mm, must
6,42 €Connection plate with Neutrik Speakon connector, designed to be used with AUDAC, Niko or standard 45 x 45 installation materials. Available in Black (/B) & White (/W). (Mounting frame and cover plate not included)
-
Toode lisati ostukorvi:
QuickFit™ 2-way 8" ceiling speaker with TwistFix™ grill
QuickFit™ 2-way 8″ ceiling speaker with TwistFix™ grill
60,92 €QuickFit™ 2-way 8″ ceiling speaker with TwistFix™ grill White version, 16 Ω
-
12″ high performance 2-way active loudspeaker
945,00 €12″ high performance 2-way active loudspeaker Black version
-
WaveDynamics™ quad-channel 70/100V power amplifier
1 314,58 €WaveDynamics™ quad-channel 70/100V power amplifier
Pood
- Home
- Pood
Võta ühendust
© Porto eCommerce. 2021. All Rights Reserved
