-
Audac WS500 Kõlar pinnapealner 6½” koaksiaal, 100V, 10/5W, valge
46,50 €The WS500 is a design wall loudspeaker with a rounded shape made of white ABS and a white, varnished metal grill. Thanks to its special shape as well as the entire aspect, the loudspeaker aesthetically lends itself to the wall. The WS500 is suitable for speech and music with a broadband loudspeaker of 10 Watt. Fitted with a 100V line transformer and connections for different power taps. They are made of high quality components, to ensure a beautiful warm sound reproduction of music and speech. Furthermore, they all have an integrated 100V line transformer with several power taps, whereby they can be used in standard low impedance Hi-Fi or larger 100V PA systems. The cone is moisture-proof treated, so they can be used in damp rooms or in outside applications, the grill and housing can be painted to integrate seamlessly into your interior.
-
Setup box installation accessories
23,42 €Setup box installation accessories Mounts three units into a 19” equipment rack (1 HE)
-
Audac CAP12 Võimsusvõimendi 120W/100V
419,08 €The CPA12 is a professional single channel 100V power amplifier with a power of 120 Watt, especially designed for most common 100V PA systems and perfect to be used in combination with the CPR12 pre-amplifier. It is designed as a no-nonsense amplifier with only the necessary controls and connections. This creates great simplicity in use and installation. There are several power output taps available for use in 100V, 70V and even 4 Ohm Low impedance installations and they are fitted with an advanced multipurpose protection circuit. The protection circuit detects DC malfunction, short circuit, overheating, overload and limits the signal when necessary. Another present feature is the 24 V DC connection for powering the amplifier with emergency power when the main power is shut down. At the back of the amplifier, there are trim potentiometers to set the input level, a high pass filter switch and a ground lift switch provided. The input connection is made with balanced XLR connectors and there is a signal output for linking with other amplifiers. The steel 19″ housing has a height of 2 HE.
-
Toode lisati ostukorvi:
ceiling flying system for 1x FX 3.15 - black
ceiling flying system for 1x FX 3.15 – black
714,75 €ceiling flying system for 1x FX 3.15 – black Black
-
Full range horn speaker 12″ 100V
1 274,00 €Full range horn speaker 12″ 100V Black version – 8Ω and 100V
-
Toode lisati ostukorvi:
Audac BASO10/C Bassikõlar 10" - 8Ω/225W, kreemjas
Audac BASO10/C Bassikõlar 10″ – 8Ω/225W, kreemjas
182,32 €The BASO cabinets are universally usable passive bass cabinets. Their bass reflex design is engineered to be as compact as possible while giving the maximum performance in terms of sound quality and pressure. Their enclosures are crafted out of sturdy high-quality plywood while their elegant design enables them to be placed in any environment. The BASO10 is loaded with a 10” high-performance woofer with an RMS power rating of 225 Watt and maximum power of 450 Watt. The strength of this loudspeaker originates from a four layer wounded 1.5” voice coil in combination with an over-sized ferrite type magnet which provides an unusual high force factor. In combination with the low-loss suspension, this results in a linear behaviour with high efficiency and extremely wide frequency range These carefully selected high-grade materials in collaboration with accurate acoustical craftsmanship results in a deep and true to nature reproduction of bass. The highly-efficient design results in a sensitivity of 96 dB with capability of continuous sound pressure production up to 120 dB. The frequency response ranges from 54 Hz up to 1.2 kHz while going down to 38 Hz at -10 dB. Besides these acoustical aspects, a lot of attention has been paid to all other aspects making it as versatile as possible. The enclosure is compact designed without any sacrifice to robustness due to the 15 mm high-quality plywood material finished with structured coating. Connections are made using two SpeakON compatible connectors located in a recessed connector dish, allowing link-through to other cabinets. This also allows close placement to any wall or corner.
-
Ceiling speaker with fire dome 100V
50,25 €Ceiling speaker with fire dome 100V White version – RAL9010
-
Wall line input – 45x45mm – terminal block
69,33 €Wall line input – 45x45mm – terminal block Wall line input – 45×45 mm- terminal block – black
-
Setup box installation accessories
5,75 €Setup box installation accessories Mounts one unit to a flat surface
-
Audac WMM20 Paigaldustoos süvistatav MERO2 kõlarile
8,08 €The WMM20 is an optional accessory for the MERO2 loudspeaker, allowing the speaker to be installed in any concrete or brick wall. The dimensions measure 96 mm x 144 mm, with a built-in depth of 83 mm. Four break-out tabs are allowing cable inlet from any direction, while the styrofoam insert keeps the inside clean and eases the plastering and finishing of the wall.
-
Audac M2DIS 7” puuteekraan M2-le
625,00 €The M2DIS is an optional display unit with touchscreen which can be installed internally in the front panel of the M2 Multi-Media Digital Audio Mixer. This unit consists of a 7” TFT display panel with a resolution of 800 x 480 px that is fitted with a resistive touch-screen panel. It is controlled by a powerful 32 bit processor which communicates directly with the M2’s DSP processor. This unit allows the user to operate the control functions of the matrix systems without any external equipment. So it is now possible to set up zone selection or input mixing without any external devices. This can be useful when the system is installed in a technical room where no external control devices are within reach.
-
Toode lisati ostukorvi:
Connection cable with 5-pin awx5 connector
Connection cable with 5-pin awx5 connector
6,08 €Connection cable with 5-pin awx5 connector 0.7 meter, white colour
-
15″ high performance 2-way loudspeaker
669,42 €15″ high performance 2-way loudspeaker Black version
-
Toode lisati ostukorvi:
Connection plate RJ45 repeater 45 x 45 mm
Connection plate RJ45 repeater 45 x 45 mm
45,92 €Connection plate RJ45 repeater 45 x 45 mm Black version
-
Audac DSP40 DAB/DAB+/FM tüüner
257,83 €The DSP40 is a professional DAB/DAB+ & FM tuner which provides access to a wide variation of radio stations while guaranteeing a high-quality audio reproduction. Station selection can be done manually or automatically, while up to 10 preferred channels can be internally stored and recalled. The front panel of the system accommodates a 2.8” TFT display in combination with a push rotary function dial and 4 tactile pushbuttons. The controls and indicators on the front panel of the unit are guaranteeing an intuitive and user friendly operation, allowing hassle free operation and configuration to even unexperienced users. Information such as radio station information carried by RDS / Radiotext and signal reception strength are indicated. The signal output level is user configurable while dynamic range compression (DRC) is supported, improving the intelligibility for low volumes in applications with high levels of background noise. Other functions such as mono/stereo (FM) switching always guarantee the best possible audio reception. The antenna input is implemented by an F-type connector allowing connection of the included antenna cable or any other external antenna using 75 O coaxial cabling. The balanced stereo line output is connected through two 3-pin terminal block connections. The RS-232 communication port allows system integration with any home or industrial automation system, while an optional 2.4 GHz remote control allows handheld control while hidden out of sight.
Please note: An outdoor antenna is necessary for DAB/DAB+ reception. For DAB/DAB+ reception we suggest the RGA12 outdoor DAB/DAB+ antenna.
-
Outdoor design column speaker 12 x 2″
543,25 €Outdoor design column speaker 12 x 2″ Outdoor white version
-
Toode lisati ostukorvi:
Connection cable with 5-pin awx5 connector
Connection cable with 5-pin awx5 connector
6,08 €Connection cable with 5-pin awx5 connector 0.7 meter, black colour
-
Toode lisati ostukorvi:
Kõlari süvistatav montaažikarp Audac CMM306
Kõlari süvistatav montaažikarp Audac CMM306
91,08 €Speaker built-in box for concrete casting with mineral fibreboard
-
Toode lisati ostukorvi:
Mounting bracket for HS212MK2 and HS212TMK2
Mounting bracket for HS212MK2 and HS212TMK2
104,25 €Mounting bracket for HS212MK2 and HS212TMK2 Black version
-
Audac CPB115R Kõlarikott PX115-le
36,00 €The CPB series are heavy duty splash waterproof speaker bags especially designed for the protection and handling of the AUDAC PX and RX speakers in all possible situations. The design ensures that it is possible to reach the connections, place the speaker on a stand and carry the speaker using the speaker handles even when the cover bag is attached. When not used, all these openings can be covered with a stitched flap from the same material. The front of the bag can be opened with a zipper to use the speaker without removing the bag. During transportation and storage, the front can be closed to avoid any damage to the speaker. The bags are made out of extra strong, water repelling polyester with heavy duty stitching and are finished with small rubber feet. The inside has a special soft coated protection to avoid structural damages.
-
Toode lisati ostukorvi:
Audac CP45ARPJ/W Pesapaneel repiiteriga RJ45, 45x45mm, valge
Audac CP45ARPJ/W Pesapaneel repiiteriga RJ45, 45x45mm, valge
46,58 €The CP45ARP allows you to attach one APM paging console on the front, while the phoenix connector on the back lets you route the signal to a next paging console or junction box. It can offer 20V power to the APM console and is also equipped with 2 jumpers to terminate the audio -or databus. An advantage the ARP version has over the ARJ version is that it also offers a built-in repeater. This repeater extends the maximum distance from 300m to 600m. The 45 x 45 mm size is compatible with AUDAC, Niko, Legrand and other standard 45 x 45 mm Mounting frames and cover plates.
-
Toode lisati ostukorvi:
Quad-channel power amplifier 4 x 480W 100V
Quad-channel power amplifier 4 x 480W 100V
1 137,83 €Quad-channel power amplifier 4 x 480W 100V
-
Toode lisati ostukorvi:
Connection cable with 5-pin awx5 connector
Connection cable with 5-pin awx5 connector
10,17 €Connection cable with 5-pin awx5 connector 2.5 meter, white colour
-
Toode lisati ostukorvi:
Audac CMX700BJ Elektreet kõrvamikrofon, must, 3,5 pulkpistik
Audac CMX700BJ Elektreet kõrvamikrofon, must, 3,5 pulkpistik
36,50 €The CMX700 is an omnidirectional clip-on ear microphone designed for vocal and speech applications. Thanks to the flat frequency response characteristic which guarantees high-fidelity sound reproduction, voices will be reproduced in a natural way. Because of the EMI and low noise suppression, low frequencies are repressed, shutting out hum and interference caused by other sources, which improves the sound reproduction quality, making it suited for vocal applications. The unique tiny size and super light weight provide a comfortable and optimum fit for any occasion. It is available in black and beige with two different connector versions, 3.5mm Mini-Jack and 4-Pole Mini-XLR.
-
12″ high performance 2-way active loudspeaker
990,00 €12″ high performance 2-way active loudspeaker White version
-
Audac CPB112P Kõlarikott PX112-le
36,00 €The CPB series are heavy duty splash waterproof speaker bags especially designed for the protection and handling of the AUDAC PX and RX speakers in all possible situations. The design ensures that it is possible to reach the connections, place the speaker on a stand and carry the speaker using the speaker handles even when the cover bag is attached. When not used, all these openings can be covered with a stitched flap from the same material. The front of the bag can be opened with a zipper to use the speaker without removing the bag. During transportation and storage, the front can be closed to avoid any damage to the speaker. The bags are made out of extra strong, water repelling polyester with heavy duty stitching and are finished with small rubber feet. The inside has a special soft coated protection to avoid structural damages.
-
Toode lisati ostukorvi:
Audac CS85/W Kõlar süvistatav 2-ribaline 8"/1" - 8Ω/100v, 40/24/12/6W, valge
Audac CS85/W Kõlar süvistatav 2-ribaline 8″/1″ – 8Ω/100v, 40/24/12/6W, valge
53,08 €The CS series loudspeakers are high-quality in-ceiling loudspeakers, delivering exceptional sound quality and value for a wide variation of applications, ranging from paging and announcements to background music systems in a wide range of business applications, including hotels, restaurants and pubs, corporate offices, retail stores, etc. The CS85 in-ceiling loudspeaker features a 8” driver with a coaxially mounted 1” tweeter, having a continuous power handling of 40 Watt and a maximum power handling of 80 Watt. The 2-way construction makes the CS85 the perfect match for a wide variation highly demanding of applications, guaranteeing a high-quality reproduction of music and speech with true and deep performance in the low frequency range. This guarantees a true Hi-Fi experience. The moisture proof treatment on the speakers’ cone and aluminum front grill protects it for installation in humid or outdoor environments. A multi-tapping line transformer fitted with Fast-con™ allows fast and smooth connections to 100 Volt public address or low impedance systems. The mounting of the loudspeaker into the ceiling is achieved with a Quick-fix mechanism, offering a great installers convenience and lifetime stability. The construction of the speakers’ housing is made out of high-quality ABS, while the front is covered by a solid powder-coated aluminum grille. It comes available in different colours, while custom painting is possible for a total blending into any environment.
-
Toode lisati ostukorvi:
Dual-channel power amplifier 2 x 240W 100V
Dual-channel power amplifier 2 x 240W 100V
673,17 €Dual-channel power amplifier 2 x 240W 100V
-
Toode lisati ostukorvi:
Safelatch™ 2-way 6.5" ceiling speaker with Twist-Fix™ grill
Safelatch™ 2-way 6.5″ ceiling speaker with Twist-Fix™ grill
172,17 €Safelatch™ 2-way 6.5″ ceiling speaker with Twist-Fix™ grill White
-
Audac CPB108P Kõlarikott PX108-le
30,58 €The CPB series are heavy duty splash waterproof speaker bags especially designed for the protection and handling of the AUDAC PX and RX speakers in all possible situations. The design ensures that it is possible to reach the connections, place the speaker on a stand and carry the speaker using the speaker handles even when the cover bag is attached. When not used, all these openings can be covered with a stitched flap from the same material. The front of the bag can be opened with a zipper to use the speaker without removing the bag. During transportation and storage, the front can be closed to avoid any damage to the speaker. The bags are made out of extra strong, water repelling polyester with heavy duty stitching and are finished with small rubber feet. The inside has a special soft coated protection to avoid structural damages.
-
In-ceiling/wall back-box for flush mount ceiling speakers
64,17 €In-ceiling/wall back-box for flush mount ceiling speakers
-
Süvistatav laekõlar Audac CIRA824/W
73,83 €QuickFit™ 2-way 8″ ceiling speaker with TwistFix™ grill White version, 8Ω & 24 Watt @ 100V
-
Toode lisati ostukorvi:
Audac DMP40 SourceCon™ moodul DAB/DAB+ ja FM tüüner
Audac DMP40 SourceCon™ moodul DAB/DAB+ ja FM tüüner
109,17 €The DMP40 is a professional DAB/DAB+ & FM tuner featuring SourceCon™ modular technology. This unique technology guarantees true plug & play implementation to any compatible device. When inserted to a supporting slot, the module is instantly installed, discovered and ready for operation without requiring any additional internal wiring or complex configuration. The DMP40 provides access to a wide variation of radio stations while guaranteeing a high-quality audio reproduction. Station selection can be done manually or automatically, while up to 10 preferred channels can be internally stored and recalled. Radio station information carried by RDS / Radiotext can be retrieved, while other functions such as mono/stereo switching (FM) always guarantee the best possible audio clarity. The signal output level is user-configurable, while dynamic range compression (DRC) is supported, improving the intelligibility for low volumes in applications with high levels of background noise. Signal reception strength can be retrieved from the module and indicated on the graphical interface of the controlling device. The antenna input is implemented by an F-type connector on its panel, allowing connection of the included antenna cable or any other external antenna using 75 O coaxial cabling. The balanced stereo line output is connected through two 3-pin terminal block connections.
Please note: An outdoor antenna is necessary for DAB/DAB+ reception. For DAB/DAB+ reception we suggest the RGA12 outdoor DAB/DAB+ antenna.
-
Audac WP523/W Sisendpaneel LX523 kõlarile, valge
51,33 €The WP523 is a remote wall mixer which is meant to be used in combination with the LX523 active speaker system. It converts the signal coming from a stereo line-level audio source (such as CD-player, tuner, MP3 player, … ) or balanced microphone to the level corresponding the differential signal input on the LX523 (RJ45) making it possible to transfer high-quality audio over long distances between the wall panel and the loudspeaker, by just using inexpensive twisted pair CAT5 cabling. On the front side of the wall panel, there is a stereo RCA line input available together with a balanced XLR microphone input, both provided with their own knob which allows the signals to be mixed together. A main volume dial allows you to adjust the overall volume of the loudspeaker system. The mixing potentiometers are level with the surface and both equipped with a Push-Lock mechanism. They can be opened and hidden again by pressing it. An internal limiter avoids distortion on the input signal and intervenes when the level of the input signal reaches the clipping level. The ‘Clip’ LED located above the mixing potentiometer will illuminate when it’s recommended to reduce the level. This should be done by turning back the potentiometer. A jumper on the rear side of the panel allows you to enable the 12V phantom power for the microphone input. The connection of the wall panel should be done with twisted pair UTP CAT5 cabling whereby distances up to 500 meters can be reached. It should be connected to the 8-pin Euro-Terminal Block connector on the rear side of the panel. Available in black (/B) and white (/W).
-
WaveDynamics™ quad-channel 70/100V power amplifier
1 249,75 €WaveDynamics™ quad-channel 70/100V power amplifier
-
100V volume controller 20W 80 x 80 mm
18,50 €100V volume controller 20W 80 x 80 mm 100v wall volume controller
Võta ühendust
© Porto eCommerce. 2021. All Rights Reserved
