-
Audac XENO8/C Kõlar pinnapealner 2-ribaline 8″/1″, 8Ω/120W, kreemjas
The XENO series is a loudspeaker range specifically designed for fixed audio installations in modern environments, offering two different sizes of contemporary and elegant designed products. What makes them so unique is their full range audio design, allowing them to be used without additional bass cabinet.
The XENO8 is the 8” version, with a 1” dome tweeter and an 8” Mid /Low-frequency driver, ensuring a true-to-nature, high-fidelity reproduction of music and speech. This wooden cabinet is fitted with a slim and elegant front grill. This makes the loudspeaker suitable for environments where the music is the key element, but without making any compromises on its design. This ranges from modern and trendy clubs to pubs and dance bars where that little extra punch and depth in the music is appreciated.
The sleek and elegant design guarantees the loudspeaker to blend in with any environment. It delivers a powerful full-range sound with an RMS rating of 120 Watt and a maximum of 240 Watt. The advanced integrated protection circuit avoids tweeter damaging when an overload occurs.
The included mounting bracket makes it possible to mount the loudspeaker in both horizontal and vertical position, up to 20°, making it suitable for every application. The connections can be made on the rear side of the loudspeaker with a Euro Terminal block connector. Ships with 2mm safety cable with a PVC jacket. All XENO series speakers are available in black (/B) or white (/W).
-
Audac MBK110/W Paigaluskronstein PX110 kõlarile, valge
The MBK110 series mounting brackets are especially designed for the mounting of the AUDAC PX series speakers. These black brackets allow mounting the speakers in any possible situation. For the mounting of the PX series speaker with the corresponding bracket, the pole flange adapter in the bottom of the speaker has to be replaced with a screw flange adapter, which is included. They are constructed of solid steel, and come with all the necessary parts for safe mounting, such as 2 M10 bolts and a safety cable with M10 eye bolt mounting. This bracket is also available in white, MBK110/W
-
Audac CPE100 Käepidemed CAP ja CPA võimenditele
These screwable brackets can be attached to the front of a CPA/CPR unit and allows you to remove the unit from the rack in which it is installed more easily.
-
Audac RGA10 FM välisantenn
The RGA10 is an omnidirectional outdoor antenna for FM radio reception. The circular construction allows antenna assembly around any pole with a 30~50 mm diameter, while the aluminum construction is resistant for permanent outdoor exposure to the elements. Connections are made using an included F-type connector.
-
Light track adapter mount for ATEO4 – 3-Phase Track
Light track adapter mount for ATEO4 – 3-Phase Track White version
-
Audac CMX720BJ Elektreet peamikrofon, must, 3,5 pulkpistik
The CMX720 is an omnidirectional headset microphone designed for vocal and speech applications, ranging from speeches to aerobic lessons. The flat frequency response and the high Sound Pressure level ensure a high-fidelity sound reproduction, true to the user’s voice and intonation, even when a hard and vigorous sound is applied. The omnidirectional pattern reduces the feedback to a minimum. The tiny design doesn’t decrease its performance, but enhances the user’s comfort and makes wearing it almost unnoticable, both to speaker and audience. It is available in Black with mini-jack or mini-XLR connector.
-
Setup box installation accessories
Setup box installation accessories Mounts two units into a 19” equipment rack (1 HE)
-
Compact wall speaker with CleverMount™ 2″
Compact wall speaker with CleverMount™ 2″ Black version – 16Ω
-
Wall line input – 45x45mm – terminal block
Wall line input – 45x45mm – terminal block Wall line input – 45×45 mm- terminal block – white
-
10″ high performance 2-way loudspeaker
10″ high performance 2-way loudspeaker White version
-
Connection cable with dual steel core, snap hook & open ends – 10 meter
Connection cable with dual steel core, snap hook & open ends – 10 meter White
-
Audac CSW55 Kõlar süvistatav evakuatsiooni LED-ga, 4″ – 8Ω/100V, 15/6/3/1,5W
The CSW55 is a professional ceiling speaker with an integrated white LED unit which can be used as visible alarm signal. It features a 4 1/3″ single cone loudspeaker which is capable of producing up to 10 Watt RMS, with a maximum of 20 Watt and it ensures good reproduction of speech and background music in all situations. The speaker is fitted with a 100V line transformer and there are different power taps available for 6 Watt, 3 Watt and 1.5 Watt at 100V. The integrated White unit deliver a light intensity of 24 Lumen on a supply voltage of 24V DC.
-
Flush mount box for AUDAC wallpanel – hollow wall
Flush mount box for AUDAC wallpanel – hollow wall
-
10″ high performance 2-way active loudspeaker
10″ high performance 2-way active loudspeaker Black version
-
Audac CP45PE/B Pesapaneel Speacon kõlaripesa, 45x45mm, must
Connection plate with Neutrik Speakon connector, designed to be used with AUDAC, Niko or standard 45 x 45 installation materials. Available in Black (/B) & White (/W). (Mounting frame and cover plate not included)
-
QuickFit™ 2-way 8″ ceiling speaker with TwistFix™ grill
QuickFit™ 2-way 8″ ceiling speaker with TwistFix™ grill White version, 16 Ω
-
12″ high performance 2-way active loudspeaker
12″ high performance 2-way active loudspeaker Black version
-
WaveDynamics™ quad-channel 70/100V power amplifier
WaveDynamics™ quad-channel 70/100V power amplifier
-
Mounting bracket for HS208MK2 and HS208TMK2
Mounting bracket for HS208MK2 and HS208TMK2 Black version
-
Audac WS524D/W Kõlar süvistatav 2-ribaline 5¼”/1″ – 16Ω/100V, 30/24/12/6W, valge
The WS series loudspeakers are high-quality in-wall/ceiling loudspeakers, delivering exceptional sound quality and value for a wide variation of applications, ranging from paging and announcements to background music systems in a wide range of business applications, including hotels, restaurants and pubs, corporate offices, retail stores, etc. The WS524 in-wall/ceiling loudspeaker features a 5 ¼” driver with a coaxially mounted 1” tweeter, having a continuous power handling of 30 Watt and a maximum power handling of 60 Watt. The 2-way construction makes the WS524 the perfect match for a wide variation highly demanding of applications, guaranteeing a high-quality and true-to-nature reproduction of music and speech. The moisture proof treatment on the speakers’ cone and aluminum front grill protects it for installation in humid or outdoor environments. A multi-tapping line transformer fitted with Fast-con™ allows fast and smooth connections to 100 Volt public address or low impedance systems. The mounting of the loudspeaker into the wall or ceiling is achieved with a Quick-fix mechanism, offering a great installers convenience and lifetime stability. The construction of the speakers’ housing is made out of high-quality ABS, while the front is covered by a solid powder-coated aluminum grille. Custom painting is possible for a total blending into any environment.
-
Compact wall speaker with CleverMount™ 2″
Compact wall speaker with CleverMount™ 2″ White version – 8Ω
-
Connection cable with 5-pin awx5 connector
Connection cable with 5-pin awx5 connector 5.0 meter, white colour
-
Audac CMX726/B Elektreet peamikrofon, must
The CMX726 is a headset condenser microphone with an omnidirectional pickup pattern, designed for a wide variation of vocal and speech applications. The back-electret condenser capsule with flat frequency response guarantees a pristine audio quality true to the speakers voice and intonation. The high SPL capabilities guarantee a true reproduction without distortion even while exposed to hard and vigorous sounds. The construction is lightweight and ergonomically designed, guaranteeing a comfortable fit with minimum visual impact. The dual-ear construction allows it for being used for even the most energetic performances. A drop stopper on the microphone boom avoids humidity to reach the microphone cell while the microphone boom itself can slightly be adjusted to allow an optimal placement on the cheek. A connector splits the cable from the microphone, allowing quick exchange which is valuable for both service use or when used in combination with different types of transmitters. The microphone comes with 4 types of connectors included, making it suitable for use with different major systems manufacturers. Additional connector types are optionally available. Available in black and beige and comes with windscreen and cable clip for anchoring to clothing included.
-
Audac WMI18/B Pesapaneel 45x45mm XLR-F – EB-4p konverter, must
The WMI are flush mountable Wall Microphone Input Units, which can be integrated into several kinds of installation materials for system integration. They are fitted with a Female XLR input connector on the front side and a terminal block connector on the rear side. The signal which is applied to the input connection is converted to a differential signal with increased voltage levels. This way, the signal is made insensitive to interference and noise and can be transferred over a long distance without any loss of quality. This allows reliable signal transmission up to 300 meters over CAT5E (or better) twisted pair cabling. A jumper on the rear side allows enabling of 15 Volts phantom power. It should be used in combination with a matching device on the receiver end.
-
Outdoor universal wall speaker 5 1/4″
Outdoor universal wall speaker 5 1/4″ Outdoor white version
-
Connection cable with dual steel core, snap hook & open ends – 7 meter
Connection cable with dual steel core, snap hook & open ends – 7 meter White
-
15″ high performance 2-way active loudspeaker
15″ high performance 2-way active loudspeaker Black version
-
Audac CMX700BX Elektreet kõrvamikrofon, must, miniXLR pistik
The CMX700 is an omnidirectional clip-on ear microphone designed for vocal and speech applications. Thanks to the flat frequency response characteristic which guarantees high-fidelity sound reproduction, voices will be reproduced in a natural way. Because of the EMI and low noise suppression, low frequencies are repressed, shutting out hum and interference caused by other sources, which improves the sound reproduction quality, making it suited for vocal applications. The unique tiny size and super light weight provide a comfortable and optimum fit for any occasion. It is available in black and beige with two different connector versions, 3.5mm Mini-Jack and 4-Pole Mini-XLR.
-
Audac WS624D/W Kõlar süvistatav 2-ribaline 5¼”/1″ – 16Ω/100V, 30/24/12/6W, valge
The WS series loudspeakers are high-quality in-wall/ceiling loudspeakers, delivering exceptional sound quality and value for a wide variation of applications, ranging from paging and announcements to background music systems in a wide range of business applications, including hotels, restaurants and pubs, corporate offices, retail stores, etc. The WS624 in-wall/ceiling loudspeaker features a 5 ¼” driver with a 1” tweeter, having a continuous power handling of 30 Watt and a maximum power handling of 60 Watt. The 2-way construction makes the WS624 the perfect match for a wide variation highly demanding of applications, guaranteeing a high-quality and true-to-nature reproduction of music and speech. The moisture proof treatment on the speakers’ cone and aluminum front grill protects it for installation in humid or outdoor environments. A multi-tapping line transformer fitted with Fast-con™ allows fast and smooth connections to 100 Volt public address or low impedance systems. The mounting of the loudspeaker into the wall or ceiling is achieved with a Quick-fix mechanism, offering a great installers convenience and lifetime stability. The construction of the speakers’ housing is made out of high-quality ABS, while the front is covered by a solid powder-coated aluminum grille. Custom painting is possible for a total blending into any environment.
-
Compact wall speaker with CleverMount™ 2″
Compact wall speaker with CleverMount™ 2″ Black version – 8Ω
-
Audac PX112MK2 Kastkõlar 2-ribaline 12″/1,3″ – 8Ω/300W, must
The PX series are compact full range loudspeaker cabinets for a wide variety of indoor applications. They come in four different models, each of them with different size and performance meeting the requirements for every specific application. The PX112 is the 12” model of the PX family, consisting of a 12” high output woofer and a compression driver with 1.3” voice coil. The compression driver is fitted with a 90° x 75° coverage horn which can be rotated allowing both horizontal and vertical use. Thanks to the high quality components and an accurately optimized integrated passive crossover network with tweeter overload protection, the PX112 delivers a clear and natural sound with an RMS power of 300 Watt and a maximum power of 600 Watt. The frequency range (-10 dB) starts from 55 Hz up to 20 kHz and the sensitivity (1W / 1m) reaches 100 dB while a maximum continuous sound pressure level from 125 dB can be achieved. The construction of the cabinets is made of medium density fiberboard with a durable textured and scratch resistant EPDM coating. The front side of the cabinet is finished with a powder coated steel grill lined with acoustically transparent backing. Recessed carry handles on both sides of the cabinet make carrying easy. Positioning and suspension of the speaker is easily achieved by using the standard 35 mm pole adapter on the bottom side and M10 rigging points. An optional mounting bracket provides a complete solution for wall mounting. Two speaker connectors on the rear side of the cabinet provide reliable connections with easy link-through to other cabinets.
-
2-way 6.5″ design surface mount loudspeakers
2-way 6.5″ design surface mount loudspeakers Black version
-
2-way 6.5″ design surface mount loudspeakers
2-way 6.5″ design surface mount loudspeakers White version
-
2-way 4″ design surface mount loudspeakers
2-way 4″ design surface mount loudspeakers Black version
-
2-way 4″ design surface mount loudspeakers
2-way 4″ design surface mount loudspeakers White version
-
Sennheiser headset cable, XLR-5M connector, 2 m
Sennheiser headset cable, XLR-5M connector, 2 m. Compatible with the HMD 300 PRO, HMD 301 PRO, HMD/HME 26-II and the HMD/HME 27 PRO
-
Sennheiser HMD 300 PRO headset system, cable not included
Sennheiser HMD 300 PRO headset system, cable not included