-
Setup box installation accessories
25,75 €Setup box installation accessories Mounts four units into a 19” equipment rack (1 HE)
-
Setup box installation accessories
16,33 €Setup box installation accessories Mounts one unit into a 19” equipment rack (1 HE)
-
Audac WB5065/W Paigalustoos pinnapealne DW5065/WP523/MWX65 paneelidele, valge
10,00 €The WB5065are surface mountwall boxes for AUDAC wall control panels such as the DW5066, MWX65 and WP523. Surface mounting boxes are available in white (WB5065/SW) and black (WB5065/SB).
-
Active audio transceivers XLR
68,67 €Active audio transceivers XLR Wall microphone input unit (45 x 45 mm)
-
Toode lisati ostukorvi:
Rack mounting set for half rackspace 1u enclosures
Rack mounting set for half rackspace 1u enclosures
25,08 €Rack mounting set for half rackspace 1u enclosures
-
Setup box installation accessories
23,42 €Setup box installation accessories Mounts three units into a 19” equipment rack (1 HE)
-
Wall line input – 45x45mm – terminal block
69,33 €Wall line input – 45x45mm – terminal block Wall line input – 45×45 mm- terminal block – black
-
Setup box installation accessories
5,75 €Setup box installation accessories Mounts one unit to a flat surface
-
Setup box installation accessories
20,25 €Setup box installation accessories Mounts two units into a 19” equipment rack (1 HE)
-
Wall line input – 45x45mm – terminal block
69,33 €Wall line input – 45x45mm – terminal block Wall line input – 45×45 mm- terminal block – white
-
Flush mount box for AUDAC wallpanel – hollow wall
7,42 €Flush mount box for AUDAC wallpanel – hollow wall
-
Audac WMI18/B Pesapaneel 45x45mm XLR-F – EB-4p konverter, must
62,42 €The WMI are flush mountable Wall Microphone Input Units, which can be integrated into several kinds of installation materials for system integration. They are fitted with a Female XLR input connector on the front side and a terminal block connector on the rear side. The signal which is applied to the input connection is converted to a differential signal with increased voltage levels. This way, the signal is made insensitive to interference and noise and can be transferred over a long distance without any loss of quality. This allows reliable signal transmission up to 300 meters over CAT5E (or better) twisted pair cabling. A jumper on the rear side allows enabling of 15 Volts phantom power. It should be used in combination with a matching device on the receiver end.
