02 Helitehnika

RODE INVISI3PK Discreet skinsafe mount for lavalier microphones. Supports RODE Lavalier and smartLav. Pack of 3.

The RØDE invisiLav is designed to aid the concealing of the Lavalier and smartLav microphones. Its soft construction absorbs noise and vibration, while the wide, flat profile provides coverage from the elements and allows for versatile mounting. There’s two mounting points in case a redundant mic is required, and cable management on the side. Available in either a pack of three or a bulk pack of ten, the invisiLav comes with pre-cut, skinsafe adhesive that can be used to stick the invisiLav to either the body or to fabric. The invisiLav itself is also made from a medical grade skin safe material so it can be mounted on the body without fear of irritation.

RODE INVISI10PK Discreet skinsafe mount for lavalier microphones. Supports RODE Lavalier and smartLav. Pack of 10.

The RØDE invisiLav is designed to aid the concealing of the Lavalier and smartLav microphones. Its soft construction absorbs noise and vibration, while the wide, flat profile provides coverage from the elements and allows for versatile mounting. There’s two mounting points in case a redundant mic is required, and cable management on the side. Available in either a pack of three or a bulk pack of ten, the invisiLav comes with pre-cut, skinsafe adhesive that can be used to stick the invisiLav to either the body or to fabric. The invisiLav itself is also made from a medical grade skin safe material so it can be mounted on the body without fear of irritation

RODE LAVALIER Omnidirectional lavalier/lapel microphone

The RØDE Lavalier is a discreet lapel microphone that provides broadcast-quality audio when close-miked in almost any scenario.

The Lavalier’s low self-noise, user friendly omni-directional polar pattern and minimal appearance make it an ideal solution for film, television, video, theatre, house of worship and anywhere where a high quality microphone needs to be heard but not seen.

The microphone capsule is connected via a 1.2m (4′) shielded, Kevlar® reinforced cable that has been rigorously strain tested up to 10kg to ensure reliable performance.

The included mini-furry for high wind protection ensures quality recordings in adverse environments, and the included cable management clips ensure that you are able to minimise the microphone and cable visibility, while providing maximum mobility for the wearer.

RODE HS2BS HS2 Headset Microphone, Black color, Small (child) size

Updated low-profile ergonomic design
Ultra-Lightweight construction for complete comfort
Adjustable corrosion resistant stainless spring steel boom arm and headband
Flexible hypoallergenic sillicone ear strips
Durable ceramic painted finish available in black or pink
Available in small or large sizes
Omni-directional polar pattern
Low handling noise
Includes Mini-furry and pop filter / windshield
1.2m Kevlar reinforced braid shielded cable
Gold plated 3.5mm TRS output with removable locking nut
Five year extended warranty when you register your microphone

RODE HS2BL HS2 Headset Microphone, Black color, Large (adult) size

RODE GN1 Miniature (85m”) flexible goose neck for NT6. By using the GN1 with NT6 microphone stand you get an added height that allows you to have total control over the placement of the NT6.

RODE DS1 The DS1 is a weighted table top microphone stand.

RODE BOOMPOLEPRO Carbon Fibre five-section professional boom pole

Made from carbon fibre, the RØDE Boompole Pro weighs only 535gm (18oz) and, from a compact 810mm (2‘ 8”), extends to a full 3m (10’). Designed for use with professional shotgun microphones such as the RØDE NTG3 as well as the Blimp windshield system, the Boompole Pro joins RØDE’s popular boom pole range which now consists of five models ranging in size, weight, and construction material. Each of the five pole sections is comprised completely from carbon fibre making it incredible lightweight while maintaining high levels of strength. The sections are easily extendable with one hand thanks to an intuitive twist-lock mechanic. RØDE offers boom pole cable clips as an optional accessory, however the company’s new RØDELink wireless XLR adaptor allows users to record audio from a shotgun microphone on the end of the Boompole Pro without the hassle and possible handling noise of cables.

RODE BROADCASTER Precision 1″ broadcast cardioid end-address condenser microphone. Features unique ‘on air’ indicator.

Large diaphragm 1” gold-sputtered capsule
On-Air indicator LED
Ultra-low noise
Voice tailored low-cut feature
Internal pop-filter
10 year extended warranty when you register your microphone

The Micro Boompole Pro is a unique, modular booming device that allows location sound engineers to capture audio in confined or difficult spaces.Optimised for use with the VideoMicro microphone, the Micro Boompole Pro’s three sections combine to a maximum length of 2.2m (7’2”). Using an industry standard 3/8” thread, these sections can also be used to extend the Boompole Pro to reach to over 3.7m (12′).

RODE DEADCATVMPR Artificial fur is specially designed so as to minimise wind noise in high wind conditions, while remaining acoustically transparent.

RODE DEADCATVMP+ Artifical Furry Windshield with rear seal designed for the VideoMic Pro Plus microphone. Designed for use in windy environments

RODE DEADCATGO The DeadCat GO is a furry wind cover for the VideoMic GO, designed for use in windy environments.

RODE K2 Seamlessly variable dual 1″ condenser valve microphone featuring continually variable polar pattern (omni through cardioid to figure-8).

The RØDE K2 is a premium valve condenser microphone featuring dual 1” gold sputtered diaphragms. Infinitely variable control of the polar pattern from omnidirectional through cardioid and bidirectional/figure-8 provides the freedom and flexibility to excel in any recording situation.

RODE VIDEOMICME Compact TRRS cardioid microphone designed for iOS devices and smartphones. 3.5mm headphone output.

The VideoMic Me is a compact and lightweight directional microphone for use with smartphones. It features an in-built 3.5mm TRRS output for plugging directly into a smartphone’s headphone socket. Its flexible mounting bracket accommodates a wide range of smartphones and allows the microphone to be fitted for primary camera or front camera (‘selfie’) use

RODE AI1 Ai-1 Single channel Audio interface with combo XLR/instrument input, High quality headphone amp and Balanced 1/4″ outputs

RØDE’s AI-1 Audio Interface is packed with incredible technology to ensure recording on your computer is easy, versatile and sounds superb. The AI-1’s single input is a NeutrikTM Combo Jack, which takes both a 3-pole XLR (common to most microphones) and a quarter-inch jack common to most electric instruments like guitar, bass et al. Layering tracks is as easy as plug in, set level and go. Not only does the AI-1 deliver crystal clear audio to your computer software, but headphones have never sounded sweeter thanks to the discrete studio-quality headphone output and level control.

RODE M1S Switchable live performance cardioid dynamic microphone. Fully lockable low-noise switch.

RODE SC6LKIT Interview Kit containing SC6-L Mobile Interface for Apple Devices Plus 2x Smartlav+

The Interview Kit comes with the SC6-L, two LAV-CLIPs, two WS-LAV windshields, a storage pouch, and two smartLav+ microphones, RØDE’s professional grade lavaliers. The smartLav+ is a discreet and portable 4.5mm miniature mic made with omni-directional condenser capsules and Kevlar® reinforced cables, making them suitable for a wide range of film, television and broadcast applications.

RODE SC6L Mobile Interface for Apple Devices Featuring 2x TRRS Input and Stereo Headphone Output

With two TRRS inputs and one stereo headphone output, the SC6-L can be used with two RØDE smartLav+ microphones and one pair of headphones, allowing audio monitoring and playback, perfect for interview scenarios. The SC6-L can also be used with RØDE’s range of VideoMics in conjunction with a TRRS adaptor, such as the SC4 and SC7

RODE SMARTLAVP The SmartLav+ is a broadcast-grade wearable microphone designed for use with smartplones and other 3.5mm TRRS devices

The smartLav+ is a broadcast-grade wearable microphone designed for use in a wide range of film, television and broadcast scenarios, or wherever broadcast quality audio is required in a discreet, portable format without the complication and expense of additional wireless equipment.

RODE IXYL Digital stereo microphone (up to 24/96K recording) for lightning-compatible Apple devices including iPhone 5, 5s & 5c. Supplied with carry case and windshield.