Pood

› PP+ Fiber glass case, strong and durable

› Install 4 x V-mount batteries

› 2-ch 14.4V 4-pin XLR DC output

› LED voltage display and warning

› Charging without take out batteries

› Intelligent protective circuit design

SWIT S-6650 Carry Case for 3x S-2110 or 3x S-2120 Studio Light

Swit S-4904PSS (S-4904PSS) SDI/HDMI Wireless System – Transmitter and Panel Receiver Set (V-Mount)

WHDI wireless transmission

1000 meters (LOS) with Panel Receiver

S-4904P Broadcast/Film industry wireless system is based on WHDI wireless technology, 5.1-5.9GHz license free bands, with a new developed high Gain Panel Receiver, supports uncompressed 3G/HD/SD-SDI and HDMI to transmit 1000 meters (Line-of-Sight) distance, and less than 1 millisecond latency. The system is pure hardware connection, plug and play, which is widely used in director monitoring, drone, ropeway camera, Steadicam etc.

The Transmitter

The Transmitter has 2 omni antennas, signal interfaces are:

1x 3G/HD/SD-SDI input

1x HDMI 1.3 input

(If both SDI and HDMI are connected, the system transmits SDI as priority.)

1x 6-17V DC input

Panel Receiver

The Panel Receiver adopts 14dBi high Gain Panel Antenna and build-in wireless receiver design, to set up by lighting tripod.

The Panel Receiver interfaces are:

1x 3G/HD/SD-SDI output

1x 7-36V 4pin LEMO DC input

1000meters Transmission

In Line-of-Sight, S-4904P supports non-compressed 3G/HD/SD-SDI and HDMI 1000 meters (3300 feet) transmission, with less than 1 millisecond latency.

Embedded Audio Transmission

S-4904P supports SDI and HDMI embedded audio (CH1&2) transmission.

5.1-5.9GHz Frequency

S-4904P wireless system works at 5.1-5.9GHz License-free frequency. The frequency bands are user configurable and support 3-4 pairs wireless channels to work together in one location.

The wireless output power is less than 63mW, which will not do harm to human bodies.

Multicast Setting

Users can set several Receivers at the same frequency point as the Transmitter, to enable 1 Transmitter to multi Receivers multicast mode.

Power Supply and Set-up

Transmitter: Equipped with V-mount or Gold mount battery plates, so you can install the transmitter between camera and battery, and to power the transmitter and camera together. You can also power the transmitter via 5.5/2.1mm pole tap DC-IN, input voltage 6.5-17V.

Receiver: Provides VESA bracket to set up on lighting tripod, and power via 4-pin LEMO DC-IN, 7-36V. The package also provides V-mount or Gold mount battery plate with clamp, to install battery on lighting tripod.

› Charger for SWIT S-8845 battery

› 2-ch simultaneous charging

› Compatible with Canon BP series DV battery

› 2 DC adapting output sockets

› 4-level LED charging indicators

TA-B10 Pan tilt head with cold shoe (standard in S-1090, 1071, S-1051)

SWIT S-7004B, Battery SnapOn Plate, Panasonic VBG

CM-55C 5.5 inch Full HD 4K-HDMI LCD Monitor

› 5.5-inch IPS LCD, 1920×1080 FHD

› HDMI 1.4 (4K30p) input

› 2x 4x Quick zoom-in and Pan

› Peaking focus assist and precision adjust

› Waveform / Vector / Histogram

› Build-in 30 kinds of De-log 3DLUTs

› 16x User 3DLUT upload by SD card

› 2-ch HDMI audio meters display

› False color, Zebra, Anamorphic desqueeze

› Single joystick quick operation

› Battery slot for both NP-F & LP-E6

› DC out with dummy battery adaptor