01 Videotehnika

The SWIT S-CW-S300FS is an uncompressed wireless transmission system for 3G-SDI signals. It is based on WHDI technology, which employs license-free operating frequency bands 5.1-5.9 GHz (DFS compatible), achieving an open-field transmission distance of up to 300 meters and a latency of less than 1 ms. With a radio power of less than 100mW, it is capable of transmitting 2 audio channels embedded in the SDI signal, in addition to time code transmission by SDI. The system supports multicast, allowing up to 3-4 TX-RX pairs that can work together in one location and is fully hardware, without configuration, plug and play, which makes it highly usable for monitoring direction, drones, cameras in difficult locations, steadicam, etc..

The transmitter (Tx) has two omnidirectional antennas and supports 1 3G/HD-SDI input with 3G/HD-SDI output loop. It has a Lemo 4 Pin DC power connector (7-17V). The receiver (Rx) has five omnidirectional antennas and supports two 3G/HD-SDI outputs. It also has a Lemo 4 Pin DC power connector (7-17V).

The CW-S300 radio-link works in the license-free 5.1-5.9GHz band and supports DFS (Dynamic Frequency Switch). The transmitter and receiver are paired to work together. The system allows 3-4 transmitter-receiver pairs to operate simultaneously in the same location. The transmitting power is very low, less than 100mW, which is totally safe for the human body.

The CW-S300 radio-link system allows multicast operation, allowing the user to pair up to 4 receivers with one transmitter, so that all receivers receive the signal from the transmitter.

The transmitter has a 4-pin LEMO 7-17V power input and is equipped with the Sony F970 battery DV adapter, although it can optionally be ordered with the following DV battery adapters:

› 7” non-glaring LCD, 1920×1200 resolution

› 3000nit super high bright

› HDR capable: PQ / HLG / S-log3

› 2K/3G/HD/SD-SDI input & loop output

› HDMI 2.0 (4K60p) input & loop output

› 16-ch embedded audio meters with alert

› Select any 2 audio channels to output

› 9 steps quick zoom-in and mapping

› Focus assist with precision adjustment

› Build-in multi-camera logs to Rec.709

› User 3DLUT cube file import by USB

› On-screen TALLY display and GPI

› Zebra stripes, False color, R/G/B/Mono

› H/V delay, AFD, Timecode display

› Marker 4:3, 13:9, 14:9, 15:9, 1.85:1, 2.35:1

› V/Gold mount or various DV plates option

› USB firmware upgrade

SWIT Dual 9″ Full HD Rack LCD Monitor with IPS Panel

The Dual 9″ Full HD Rack LCD Monitor with IPS Panel from SWIT adopts two 9″ IPS (In-Plane Switching) LCD panels with Full HD resolution. It also features LED backlight, an 800:1 contrast ratio, and a horizontal and vertical viewing angle of 170°. It is overlaid with glass that protects the screens against scratches or cracks.

Camera – Lens Cap F

SWIT Receiver for SW-M450 Video Transmission System

SWIT SW-M450RS

Receiver for SW-M450 Video Transmission System.

(Transmitter not included).

SWIT Wireless FHD Video Transmitter Set (for Panasonic CGA-D54/D28)

SWIT SW-M150DS

SDI & HDMI 150 meter Wireless Video Transmitter System.

For Panasonic CGA-D54/D28 and VW-VBD58, SWIT S-8D62, S-8D58 and S-8D98 Batteries.

SWIT S-4914FS SDI/HDMI Wireless Transmission System

Broadcast-quality wireless transmission, including an S-4914T transmitter and an S-4914R receiver, employs WHDI (OFDM) technology to carry uncompressed 3G/HD/SD-SDI and HDMI signals wirelessly up to 700 meters away with less than 1ms of latency. The system is pure hardware, Plug & Play.

In Line of Sight, the S-4914FS wireless transmission system supports a distance of approximately 700 meters for uncompressed 3G/HD/SD-SDI and HDMI signal transmission, with a delay of less than 1 millisecond.

The S-4914FS wireless system operates in the 5.1-5.9GHz free band. The frequency band is user configurable and supports up to 4 simultaneous wireless channels in one location. The radio power is less than 63mW and do no harm to humans.

S-4990 is a WHDI wireless receiver with high Gain panel antenna for Broadcast/Film application. The panel receiver works with SWIT S-4904 / S-4914 transmitters, and will extend wireless transmission distance to 1000 meters. With the panel receiver, the video transmission will get more stable and reliable. The panel receiver is easy to set up and robust for field using.

Swit S-4904PSS (S-4904PSS) SDI/HDMI Wireless System – Transmitter and Panel Receiver Set (V-Mount)

WHDI wireless transmission

1000 meters (LOS) with Panel Receiver

S-4904P Broadcast/Film industry wireless system is based on WHDI wireless technology, 5.1-5.9GHz license free bands, with a new developed high Gain Panel Receiver, supports uncompressed 3G/HD/SD-SDI and HDMI to transmit 1000 meters (Line-of-Sight) distance, and less than 1 millisecond latency. The system is pure hardware connection, plug and play, which is widely used in director monitoring, drone, ropeway camera, Steadicam etc.

The Transmitter

The Transmitter has 2 omni antennas, signal interfaces are:

1x 3G/HD/SD-SDI input

1x HDMI 1.3 input

(If both SDI and HDMI are connected, the system transmits SDI as priority.)

1x 6-17V DC input

Panel Receiver

The Panel Receiver adopts 14dBi high Gain Panel Antenna and build-in wireless receiver design, to set up by lighting tripod.

The Panel Receiver interfaces are:

1x 3G/HD/SD-SDI output

1x 7-36V 4pin LEMO DC input

1000meters Transmission

In Line-of-Sight, S-4904P supports non-compressed 3G/HD/SD-SDI and HDMI 1000 meters (3300 feet) transmission, with less than 1 millisecond latency.

Embedded Audio Transmission

S-4904P supports SDI and HDMI embedded audio (CH1&2) transmission.

5.1-5.9GHz Frequency

S-4904P wireless system works at 5.1-5.9GHz License-free frequency. The frequency bands are user configurable and support 3-4 pairs wireless channels to work together in one location.

The wireless output power is less than 63mW, which will not do harm to human bodies.

Multicast Setting

Users can set several Receivers at the same frequency point as the Transmitter, to enable 1 Transmitter to multi Receivers multicast mode.

Power Supply and Set-up

Transmitter: Equipped with V-mount or Gold mount battery plates, so you can install the transmitter between camera and battery, and to power the transmitter and camera together. You can also power the transmitter via 5.5/2.1mm pole tap DC-IN, input voltage 6.5-17V.

Receiver: Provides VESA bracket to set up on lighting tripod, and power via 4-pin LEMO DC-IN, 7-36V. The package also provides V-mount or Gold mount battery plate with clamp, to install battery on lighting tripod.

TA-B10 Pan tilt head with cold shoe (standard in S-1090, 1071, S-1051)